Celexon Expert Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Accessori per proiettori Celexon Expert. Celexon Expert 2. Electric ceiling recessed projection screen
Anche per Celexon Expert: Manuale di installazione (2 pagine), Manuale di istruzioni per l'uso (9 pagine), Manuale di istruzioni per l'uso (20 pagine)

Stampa la pagina

Electrical spec

Voltage:

100V ~ 120V, 60Hz or

220V ~ 240V, 50Hz

Power consumption:

130W (max.)

0,4W (standby)

Installation

Install the screen so that it is central for most viewers. When fully extended, please

ensure that the lower third is about eye level. The screen can be wall or ceiling

mounted (You may be required to purchase screws and wall plugs suitable for your

specific building material, use Ø ca.5x35mm screws).

Ceiling installation

Mark out two parallel lines with the appropriate hole spacing of the mounting

brackets on the ceiling. Ensure that they are aligned and drill the holes. Screw the

mounting brackets to the ceiling (see fig 1). Then hang the screen on the brackets

(see fig 5) and tighten the safety screw underneath the screen (see fig 6).

Fig 1: Mounting brackets attached

to ceiling

Wall installation

Mark out two parallel lines with the appropriate hole spacing of the mounting

brackets on the wall. Ensure that they are aligned and drill the holes. Screw the

mounting brackets to the wall (fig 3). Next, hang the screen on the brackets (see

fig 5) and tighten the safety screw underneath the screen (see fig 6).

Fig 2: Side view of ceiling installation

Fig 3: Mounting brackets attached

Fig 4: Mounting

to wall

bracket

Fig 6: Safety screw

Operating instructions

Plug power cable into socket (ensure correct voltage). Position the cable so that

it does not present a hazard or comes into contact with any hot surface. You may

require an extension lead.

To lower the screen

Press the down arrow button. The screen will come down and stop automatically at

its default stop position.

To retract the screen

Press the up arrow button. The screen will automatically retract into its housing and

stop at the upper default stop position.

To stop the screen

Press the stop button (between the arrows) and the screen will automatically stop.

It is possible to adjust the stop positions. Please contact your dealer or email

[email protected] for written instructions.

Fig 5: Side view of screen

attaching to mounting

bracket