DBI SALA 2200402 Istruzioni per l'utente - Pagina 10

Sfoglia online o scarica il pdf Istruzioni per l'utente per Sensori di sicurezza DBI SALA 2200402. DBI SALA 2200402 12.

Step 3. Inspect the in-line energy absorber. Connecting hook must be free of cracks, corrosion, and other damage.

See Step 1. Inspect webbing; material must be free of cuts, abrasions, burns and discoloration. The

webbing should be free of excessive soiling, paint build-up, and rust staining. Check for chemical or heat

damage, indicated by brown, discolored or brittle areas. Check for ultraviolet damage, indicated by

discoloration and splinters and slivers along the web surface. Check for extension of the energy absorbing

device. Return the system for repairs if extended.

Step 4. Inspect system labels. The labels must be present and fully legible. See section 8.0.

IMPORTANT: If this equipment is subjected to the forces of a fall arrest, it must be removed from service and destroyed,

or returned to DBI/SALA for inspection or repair.

5.4 If inspection reveals an unsafe or defective condition, remove unit from service and destroy, or contact DBI/SALA

for possible repair.

IMPORTANT: Only DBI/SALA or parties authorized in writing may make repairs to this equipment.

5.5 USER EQUIPMENT: Inspect harness and energy absorbing lanyard according to manufacturer's instructions.

6.0 MAINTENANCE, SERVICING, STORAGE

6.1 CLEANING AND MAINTENANCE: Clean the horizontal lifeline system with water and a mild detergent. Wipe dry

with a clean, dry cloth and hang to air dry. Do not force dry with heat. An excessive build-up of dirt, paint, etc. may

prevent the system from working properly, and in severe cases, weaken the rope. A lubricant may be applied to the

moving parts of the rope tensioner. Do not allow lubricant to contact the rope tensioner teeth.

6.2 STORAGE: Store this horizontal lifeline system in a clean, dry environment, out of direct sunlight. Avoid areas where

chemical vapors are present. Thoroughly inspect the system after extended storage.

6.3 USER EQUIPMENT: Maintain, service, and store user equipment according to manufacturer's instructions.

7.0 SPECIFICATIONS

7.1 MATERIALS:

Rope Tensioner: Steel, plated

Lifeline Rope: Nylon

Carabiner: Aluminum Alloy

Energy Absorbers: Polyester and Nylon

Snap Hooks: Alloy steel, plated

8.0 LABELING

8.1 These labels must be present and fully legible:

Vacuum Anchor

Warning Label

Vacuum Anchor

Clearance Label