HiFiMAN DEVA Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Cuffie HiFiMAN DEVA. HiFiMAN DEVA 14.

Stampa la pagina

3.5mm Balanced Plug

In playback mode, tap the power button once to start/pause playback.

To answer a call, press the power button once to answer. To reject,

please press and hold the power button 2 seconds. Press twice quickly

to finish the call.

Press power button for 8 seconds continuously to reset the

headphones when it cannot pair normally.

When using a computer as the audio input device, there is no need to install

drivers when the OS is WIN10 or MacOS. For WIN 8 and older, please turn to

hifiman.com service & support to download a suitable driver. If connected to

portable devices including mobile phones, the lack of a power supply may result

in faster than usual battery drainage. Not all devices can be connected by USB

mode.

In order to connect Bluemini to an iPhone via USB cable, an Apple-certified

converter is necessary. Please note that the iPhone does not supply enough

power to support charging.

Bluemini

LED Light

USB Charging/Play Socket

Charging Button

Power Button

Bluemini

Operation Guide

When first connecting to a source via Bluetooth, press the power

button for 1 to 2 seconds to turn it on. Once the blue light flashes twice

to indicate that the power is turned on successfully, press the power

button twice to enter the pairing mode. The light will alternately flash

blue and green. At this point, check for it in the device's Bluetooth

connection list. Click Connect to complete the pairing.

To connect a paired Bluetooth audio output device, simply press the

power button for 1 to 2 seconds to turn it on. The blue light will continue

to flash at intervals. If the previously paired Bluetooth device is turned

on, it will try to connect automatically (the maximum number of

memory connected devices is 8; if no device is connected for more

than 10 minutes once the Bluemini is turned on, it will automatically

shut down).

Press power button for 5 seconds to turn it off.

To charge, connect the USB charging cable to the power supply and

Bluemini then it will charge automatically. It can be charged when

switched off. The light will remain red. When turned on the light will

flash red and white while charging and once fully charged the light will

flash green and white.

If the battery is low, a red light will flash.

To enable the USB playback mode, connect the audio device with a

USB cable to enter USB play mode. The light will flash red and white in

this mode.

When you would like to preserve power in the portable device of portable

devices and enter USB mode without charging, press the charging

button for 2 seconds before connected to the devices. The red light will

flash once. After that you can connect the Bluemini with other devices

without charging. Please pay attention to the remaining battery for the

Bluemini.

N.B.: USB playback mode can be used only if the audio playback

device and USB cable support audio playback. The choice of USB

cable may affect playback quality.