Dynamics Dings 60 Series Istruzioni

Sfoglia online o scarica il pdf Istruzioni per Freni a molla Dynamics Dings 60 Series. Dynamics Dings 60 Series 4. End mount brake nema 2 enclosure

Stampa la pagina
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
Figure 1. 5600 Style Brake
Figure 2. Outline Drawing (does not include kit components)
Number of
Model
Torque
Rotating
Number
Discs
61003-560*
1
61006-560*
1
62010-560*
2
Table 1. Brake Specifications
* Last digit of model number
1 = With both manual release and external wire outlet
2 = With manual release and without external wire outlet
**Thermal capacity (HPS/MIN.) was determined under the following test conditions: a) Room temperature 72
c) Brake mounted in a horizontal position. d) Equal on and off times. e) 1800 RPM f) Coil energized with 110% of rated voltage.
DESCRIPTION
This brake is direct acting, electromagnetically released and spring set.
It uses rotating and stationary disc contact to supply positive braking action.
It retains quick release and setting capabilities at all times. Simplicity of design
has reduced maintenance to an absolute minimum. As with any electro-
mechanical equipment, however, periodic inspection and adjustment will assure
optimum performance. As the friction disc wears, the magnet gap will increase.
The magnet gap should be checked periodically and adjusted when necessary.
WARNING: Do not install or use these brakes in an
explosive atmosphere.
**Thermal
Motor
Housing
Capacity
lb-ft
Frame
Material
HPS/MIN
3
6
56C
Steel
10
www.dingsbrakes.com
Inertia of
Rotating
X
G
Parts Lb-ft
2
6
0.006
0.81 0.31 4.01 1.00 0.045/0.060
6
0.006
0.81 0.31 4.01 1.00 0.045/0.060
6
0.010
0.81 0.31 4.01 1.00 0.050/0.065
3 = Without manual release and with external wire outlet
4 = Without both manual release and external wire outlet
o
1
Bulletin No. BK4684 (1/11)
60 Series End Mount
Brake Instructions
NEMA 2 Enclosure
Dimensions
N +
Air Gap
C
1/32
Min.
F. b) Stopping time of one second or less.
Air Gap
Max.
0.220
0.220
0.220