Galactron MK 2245 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Galactron MK 2245. Galactron MK 2245 12.

Stampa la pagina

FRONT PANEL

The front panel does not have any controls, but only illuminated messages indicating the operation of the

amplifier.

The FRONT PANEL provides the following messages:

POWER

Three coloured (red, green, yellow) Led.

The red illumination goes ON when the main power switch is in the ON position. This indicates that the

amplifier is connected to the line supply but is in stand-by.

The green illumination goes ON when the amplifier is active by the remote control and is operating

normally. The yellow illumination goes ON when the amplifier has entered the protected state.

This implies that a fuse has blown.

WARM-UP

This led flashes while the amplifier is warming-up; during this period the operating temperature and

currents are reaching steady state conditions. When warming-up, the amplifier is not able to express

its full sound reproduction qualities, and some background noise is normal. The Led will be

illuminated continuously when stable operating conditions have been reached.

Indicates that the CD program source has been selected.

TUNER

Indicates that the TUNER program source has been selected.

AUX 1

Indicates that the AUX 1 program source has been selected.

AUX 2

Indicates that the AUX 2 program source has been selected.

T.MON

Indicates that the signal from the tape deck has been selected.

VOLUME

The indicator goes On when a change in volume is requested with the remote control, for as long as the

volume button is pressed. When the volume is increasing the up arrow will light, and when the volume is

decreasing the down arrow will light. When the volume has reached the minimum settings, the associated

arrow will go Off, even is the remote control button is pressed.

BALANCE

The indicator goes On when a change in speaker balance is requested from the remote control. The right

arrow will go On when the left channel is attenuated, and the left arrow will go On when the right channel

is attenuated.

MUTING

The indicator goes On when the muting function is pressed on the remote control.

PROGRAM

The indicator goes On when the control microprocessor is placed in "program" mode, and can thus be

programmed from the remote control.

INFRA RED DETECTOR

All commands to the amplifier are communicated via this sensor. The infra red detector should be kept

free of obstruction, and the front of the amplifier should face towards the listening area.

REMOTE CONTROL

The remote control has the following button:

1. CD

Press this Key to activate the amplifier and select the CD input.

2. TUNER

Press this Key to activate the amplifier and select the TUNER input.

3. AUX 1

Press this button to activate the amplifier and select the AUX 1 input.

4. AUX 2

Press this Key to activate the amplifier and select the AUX 2 input.

5. TAPE MONITOR

Press this Key to select the TAPE IN input. The signal selected with keys 1, 2, 3, or 4 above will be sent

to the tape deck input.

6. VOLUME

Press this Key to increase or decrease the volume of the amplifier.