galant 6160EX Istruzioni per l'utente - Pagina 6

Sfoglia online o scarica il pdf Istruzioni per l'utente per Tastiera galant 6160EX. galant 6160EX 18.

Unsetting the System from any Set State

To unset the system (keypad)

Proceed to the keypad via the approved

route. A pulsed tone will indicate that the

entry timer is counting down.

Type in your User Code at the keypad

before the expiry of the entry time. The

tones will stop and the keypad will return to

the Day Mode display.

To unset the system (keyfob)

Press the OFF button on the keyfob. The system unsets with a double

beep.

To unset the System (keytag)

Hold card briefly in front of keypad LED's. The system unsets with a

double beep.

Note:

If no response is obtained after 3 seconds, when presenting a

card, then the card is not recognized by the system. If a triple

beep is heard after holding the card, there is a fault on the

system. Refer to keypad display for details.

Unsetting from Part or Night Set

Unsetting from Part set and Night set conditions is identical to

unsetting from a Full set.

Galant V2

21-01-02 09:54