AIRE DECOR BP225 1 Manuale di istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Ventilatore AIRE DECOR BP225 1. AIRE DECOR BP225 1 8.

6. MAKE THE ELECTRIC
CONNECTIONS
Remember to disconnect the power.
Follow the steps below to connect the fan to your
household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with
electrical tape. Make sure there are no loose
strands or connections.
Step 1 Connect the fan supply (black) wire and
light supply (blue) wire to the black household
supply wire as shown in Figure 13.
Step 2. Connect the netura fan (white) wire to the
white netura household wire.
Step 3 Connect the fan ground wire (green) to the
household ground wire.
Step 4 After connecting the wires, spread them
apart so that the green and white wires are on one
side of the outlet box and the black and the blue
wires are on the other side.
Step 5 Turn the connecting nuts upward and push
the wiring into the outlet box.
Figures 14 and 15 illustrate the wiring connections
for optional wall control (The wire color out of wall
control may vary, see wall control's installation
manual for correct wire connections.)
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR OTHER PERSONAL
INJURY. MOUNT FAN ONLY ON AN OUTLET
BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
POWER LINES 120V
GREEN GROUND
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
BLUE
WH
BLK
WH
LIGHT
Figure 13
POWER LINES 120V
GREEN GROUND
WIRING
LIGHT
BOX
SWITCH
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
WH
BLUE
BLK
WH
LIGHT
Figure 14
POWER LINES 120V
GREEN
GROUND
WIRING
FAN
LIGHT
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
BLUE
WH
BLK
WH
LIGHT
Figure 15
7
7. FINISHING THE
INSTALLATION
STANDARD CEILING INSTALLATION
WIRING
BOX
Slide canopy up to the ceiling as shown in Figure
16. Make sure you place the wires safely into the
outlet box. Secure the canopy to the hanger bracket
with the four screws with your fan.
CLOSE-TO-CEILING INSTALLATION
Remove the fan from the hook on the hanger
bracket. Secure the canopy to the hanger bracket
as shown in Figure 17 with four screws included
with your fan.
Outlet box
Hanger
bracket
Figure 16
Outlet box
Hanger
bracket
Figure 17
8
Screws
Canopy
Screws
Canopy