Dynamix FIBERMIX 2401 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Multiplexer Dynamix FIBERMIX 2401. Dynamix FIBERMIX 2401 13. Modular ethernet multiplexer

The both modules are installed in 16-slot 3U-high chassis, but only the host-site

chassis is equipped with network management module. The remote-site module

shall be set to "forced remote network management mode". That is to say, the 8

switch shall be turned to ON.

4.1

Please first check if the models and part numbers are in consistence, and also check if the

equipments are damaged.

4.2

•

Carefully read this manual

•

Prepare all kinds of the cable. Ensure that they are not short-circuited. Refer to

Appendix A for cable making.

•

Ensure the pressure of power supply is in the tolerance range, the chassis is well

connected with the ground.

•

Prepare the BERT and optical power meter for test of line quality.

•

Place the equipment at stable and secure environment. Pay attention to the

requirements of the ambience.

4.3

This module can be installed into Dynamix's dedicated 16-slot 3U-high chassis, 4-slot

1 U-high chassis, and single slot chassis. Slowly insert the module into the slot to the end,

and fasten the fixing screw tightly.

4.3.1

•

E1 Interface:

RJ45 socket, 120 Ohm balanced signal.

4. Installation and Test

Dynamix Co., Ltd

- 7 -