Galanz DWIUK001 Manuale di istruzioni per l'utente - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'utente per Lavastoviglie Galanz DWIUK001. Galanz DWIUK001 13.
Stampa la pagina
How to Keep Your Dishwasher in Shape
After Every Wash
After every wash, leave the door slightly
ajar so that moisture and odours are not
trapped inside.
Remove the Plug
Before cleaning or performing
maintenance, always remove the plug from
the socket.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of
the dishwasher, do not use solvents or
abrasive cleaning products. Use only a
cloth and warm soapy water. To remove
spots or stains from the surface of the
interior, use a cloth dampened with water
and a little white vinegar, or a cleaning
product made specifically for dishwashers.
Attention:
The installation of the pipes
and electrical equipment
should be done by professionals.
18
When You Go on holiday
When you go on holiday, it is
recommended that you run a wash cycle
with the dishwasher empty and then
remove the plug from the socket, turn off
the water supply and leave the door of the
appliance slightly ajar. This will help the
seals last longer and prevent odors from
forming in the appliance.
Moving the Appliance
If the appliance must be moved, try to keep
it in the vertical position. If absolutely
necessary, it can be tilted on its back.
Seals
One of the factors that cause odours to form
in the dishwasher is food that remains
trapped in the seals. Periodic cleaning with
a damp sponge will prevent this.
Warning
Electrical Shock Hazard!
Disconnect electrical power before
installing dishwasher.
Failure to do so can result in death or
electrical shock.
8. Troubleshooting Tips
ERROR CODES
When some malfunctions happen, the appliance will display error codes to warn you.
Meanings
Codes
Door open
E1
E2
Water inlet
Water drainage
E3
E4
Temperature sensor
E5
Overflow/leakage
Water leakage
E6
Heating element
E7
WARNING!
If overflow occurs, turn off the main water supply before calling the customer helpline. If there is water in the
base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher.
.
Possible Causes
The door is opened when the
dishwasher is operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating
19