Dynamode BR411AP Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Punto di accesso wireless Dynamode BR411AP. Dynamode BR411AP 9. 802.11n wireless access point and bridge

1. Hardware installation:

1-1

Connect one end of power adapter to power port on Wireless Access Point and

connect the other end into an available electrical outlet.

1-2 Connect Ethernet cable between computer and Access Point's Ethernet port

when you want to set the Access Point. After finishing settings, connect the

Ethernet cable between the wired network(router or Switch) and the Access

Point's Ethernet port.

2. Software installation:

2-1 IP address assignment

You must assign your computer a static IP address within the same range as the IP

address of the Access Point. The Access Point's default IP address is

Subnet mask of 255.255.255.0. Please see the detailed information below:

2-1-1 Windows 2000/XP IP address assignment

Click the Start button (it should be located at the lower-left corner of your monitor), then click

Control Panel. Double-click Network Connections, then right-click Local Area Connection,

Select Properties, Local Area Connection status window will appear.

Select Internet Protocol(TCP/IP), Click Properties,

10.10.10.254

with a