909 SSP Manuale di istruzioni - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico 909 SSP. 909 SSP 11. 65w multi purpose sharpener
Stampa la paginag. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool.
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed.
operations different from those intended could result in a
hazardous situation.
Use of these devices
Use the correct power tool
Properly
Use of the power tool for
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
h. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
i. Children should be supervised to ensure that they do
not play with the appliance.
Additional safety rules for sharpeners
•
Always remove the plug from the mains socket before
making any adjustments or maintenance, including
changing the wheel.
•
Always turn the sharpener/grinder off when it is not in use
and never leave it unattended without first switching off
and removing the power plug. Never leave the sharpener/
grinder until the wheel has come to a complete stop.
•
Make sure that any replacement wheel is rated at
6000rpm or higher.
•
Do not let anyone under 18 years operate this tool.
•
Rags, cloths, cord, string and the like should never be left
around the work area.
•
If you are interrupted when operating the tool, complete
the process and switch off before looking up.
•
Periodically check that all nuts, bolts and other fixings are
properly tightened.
•
Do not use a wheel that has received a blow, especially
to the side of the wheel.
•
Replace a cracked or suspect wheel.
•
Always allow a new wheel to run for a few minutes at full
speed before using it. Stand to one side at start up.
5
This