Hifonics Zeus ZXi6406 Manuale - Pagina 8
Sfoglia online o scarica il pdf Manuale per Amplificatore per auto Hifonics Zeus ZXi6406. Hifonics Zeus ZXi6406 15.
Stampa la pagina
- 1. Table of Contents
- 2. General Installation Procedure
- 3. Amplifier Feature Descriptions
- 4. Zxi6006 / Zxi1006 2 CHANNEL AMPLIFIER APPLICATIONS
- 5. Zxi4406 / Zxi6406 4 CHANNEL AMPLIFIER APPLICATIONS
- 6. Zxi8006 5 CHANNEL AMPLIFIER APPLICATIONS
- 6. Channel Discrete, One Being Mono Low Pass / 3 or 4 Channel Discrete, One Being Mono Low Pass / 3 Way Active
- 6. Front/Rear High Pass, with Constant Sub Bass
- 7. Setting up Systems after Installation for Best Performance
- 8. Troubleshooting and Diagnostics
- 9. Features and Specifications
- 10. Product Warranty
ZXi4406 / ZXi6406 4 CHANNEL AMPLIFIER APPLICATIONS
Front/rear high pass, using a 2 channel amplifier for mono sub bass
The combination of a 2 and a 4 channel amplifier, utilizing their built in
The combination of a 2 and a 4 channel amplifier, utilizing their built in
crossovers, makes it a snap to put together a full system with front and rear
crossovers, makes it a snap to put together a full system with front and rear
highs, with mono sub bass.
highs, with mono sub bass.
Interconnect cable checklist:
Interconnect cable checklist:
- Using good quality RCA cables, feed the front and rear outputs of a head unit to
- Using good quality RCA cables, feed the front and rear outputs of a head unit to
the inputs of the 4 channel amplifier as shown.
the inputs of the 4 channel amplifier as shown.
LINE OUT
- Also connect the LINE OUT of the 4 channel amplifier to the LINE INPUT of the
- Also connect the
of the 4 channel amplifier to the
2 channel amplifier as shown.
2 channel amplifier as shown.
Mono bass woofer wiring:
Mono bass woofer wiring:
Connect the mono speaker positive terminal to the LEFT +, and its negative
Connect the mono speaker positive terminal to the LEFT +, and its negative
terminal to RIGHT -.
terminal to RIGHT -.
Switch setting checklist:
Switch setting checklist:
4 channel highs amplifier:
4 channel highs amplifier:
- 1/2CH X-OVER: HI
- 1/2CH X-OVER: HI
- 3/4CH X-OVER: HI
- 3/4CH X-OVER: HI
2 channel bass amplifier:
2 channel bass amplifier:
- X-OVER switch: LP/BP
- X-OVER switch: LP/BP
Crossover frequency control checklist:
Crossover frequency control checklist:
- 4 channel highs amplifier:
- 4 channel highs amplifier:
FRONT
INPUTS
REAR
INPUTS
B OOS T
H FR - 3
M I N
M A X X
6
LINE INPUT
STEREO
INTERCONNECT
RCA CABLE
2 CHANNEL AMPLIFIER
Channels 1/2:
Channels 1/2:
- HI PASS: 100 Hz
- HI PASS: 100 Hz
LOW PASS: N/A
LOW PASS: N/A
Channels 3/4:
Channels 3/4:
- HI PASS:
- HI PASS: 100 Hz
100 Hz
- LOW PASS:
- LOW PASS: N/A
N/A
of the
2 channel bass amplifier:
2 channel bass amplifier:
- HI PASS (Subsonic filter): 10 Hz to 40 Hz
- HI PASS (Subsonic filter): 10 Hz to 40 Hz
- LOW PASS: 100 Hz
- LOW PASS: 100 Hz
Please note that these frequency points are suggestions only. Refer to the
Please note that these frequency points are suggestions only. Refer to the
loudspeaker manufacturer specifications and the section
loudspeaker manufacturer specifications and the section "Setting up systems
after installation for best performance"
after installation for best performance"
Level control checklist:
Level control checklist:
- Refer to the section "Setting up systems after installation for best performance"
- Refer to the section
Minimum final loudspeaker impedances:
Minimum final loudspeaker impedances:
- 2 ohm per channel in stereo mode.
- 2 ohm per channel in stereo mode.
- 4 ohm mono bridged.
- 4 ohm mono bridged.
BASS
"Setting up systems after installation for best performance"
TO BATTERY +12v
VIA FUSE
REMOTE TURN-ON
CHASSIS GROUND
TO BATTERY +12v
REMOTE TURN-ON
CHASSIS GROUND
"Setting up systems
REAR HIGHS
SPEAKERS
FRONT HIGHS
SPEAKERS
VIA FUSE