Autonics TR1D-T4CC Manuale - Pagina 4

Sfoglia online o scarica il pdf Manuale per Regolatore di temperatura Autonics TR1D-T4CC. Autonics TR1D-T4CC 6. Independent single display pid temperature controllers

Stampa la pagina

Installation Method

■ Mounting on DIN rail

• Mount the metal part with a spanner so that a large force is not applied to the body.

Install

①

②

1. Hang the top of backside holder to 35

mm width DIN rail.

2. Press the unit in the direction of the

arrow until there is clicking sound.

Attaching and Dettaching a Terminal Unit

■ Detaching

ⓐ

Lift the lower part of the terminal unit ⓐ

upwards by using a tool (e.g. flat-head

driver).

• When disconnecting terminal unit and wiring, refer to 'Connections' to attach to

right position. Failure to follow this instruction may result in fire product damage or

malfunction.

Mode Setting

Display part

→

[▲] key over 2 sec

switching

No key input over

→

screen protection

protection

time

[▼] + [▲] key over 3

Digital input key

→

RUN

sec

[MODE], [◀], [▲] or

→

SV setting

[▼] key

Parameter

[MODE] key over 2

→

sec

[◀] + [▲] + [▼] key

→

Parameter reset

over 3 sec

Uninstall

②

①

1. Pull the bracket handle on the bottom

of the unit in the direction of the arrow.

2. Lift the unit up while pulling the handle

bracket to remove.

■ Attaching

Press the terminal unit downwards to

insert.

Auto

Screen

[MODE], [◀], [▲], [▼] key

Auto

[MODE] key or no key

input over 3 sec

[MODE] key over 2 sec

group

Auto

Parameter Setting

• Some parameters are activated/deactivated depending on the model or setting of

other parameters. Refer to the descriptions of each item.

• Select group by [▲], [▼] key and press [MODE] key to parameter setting mode in

parameter group setting mode.

• [MODE] key: Move to next item after saving / Return to upper level with save (≥ 2 sec)

[◀] key: Move digits / Return to the upper level without saving (≥ 2 sec) / Return to

RUN mode without saving (≥ 3 sec)

[▲], [▼] key: Select parameter / Change setting value

• Return to the upper level without saving when there is no key input for more than 30

seconds.

• The range in parentheses '( )' is the setting range when the set value of the 'input

specification' parameter is used with one decimal point.

• Recommended parameter setting sequence: Parameter 2 group → Parameter 1 group

→ SV setting mode

■ Parameter 1 group

Parameter

Display Default Setting range

1-1

Lock

Heater

1-2

current

monitoring

1-3

Auto tuning

AL1 alarm

1-4

temperature

AL2 alarm

1-5

temperature

Heating

1-6

proportional

band

Heating

1-7

integral time

Heating

1-8

derivative

time

Cooling

1-9

proportional

→

band

Cooling

1-10

integral time

Cooling

→

1-11

derivative

time

→

RUN

1-12 Dead band

01)

→

1-13 Manual reset

→

Heating

1-14

hysteresis

Heating OFF

1-15

offset

Cooling

1-16

hysteresis

Cooling OFF

1-17

offset

01) When set to the + value, the dead band is formed based on SV and does not control any control.

When set to the - value, the overlap band is formed based on SV, perform the heating and cooling control at the

same time.

02) Parameter display following to the setting value of '2-8 Control output mode'

HEAT: '1-14 & 15 Heating hysteresis & OFF offset'

COOL: '1-16 & 17 Cooling hysteresis & OFF offset'

H-C: '1-14 & 15 Heating hysteresis & OFF offset', '1-16 & 17 Cooling hysteresis & OFF offset'

OFF

LOC1: Lock parameter 2 group

LOC2: Lock parameter 1, 2 group

LOC3: Lock parameter 1, 2 group

LOCK

OFF

+ SV setting lock

• It is possible to check the value only in

lock mode.

[CT input model]

0.0 to 50.0 A

CT-A

OFF OFF, ON: Execution

Deviation alarm: -F.S. to F.S. ℃/℉

Absolute value alarm: Within input

AL1

1250

• Changing the '2-16/19 AL1/2 alarm

operation' and '2-17/20 AL1/2 alarm

option' will automatically reset the

value to the maximum or minimum

AL2

1250

that will not be output.

10 0.1 to 999.9 ℃/℉

H-P

240 0 (OFF) to 9999 sec

H-I

49 0 (OFF) to 9999 sec

H-D

10 0.1 to 9999 ℃/℉

C-P

240 0 (OFF) to 9999 sec

C-I

49 0 (OFF) to 9999 sec

C-D

-Proportional band to +Proportional

band ℃/℉

-999 to 999 (-199.9 to 999.9) ℃/℉

50 0.0 to 100.0%

REST

2 1 to 100 (0.1 to 100.0) ℃/℉

hHYS

0 0 to 100 (0.0 to 100.0) ℃/℉

hOST

2 1 to 100 (0.1 to 100.0) ℃/℉

cHYS

0 0 to 100 (0.0 to 100.0) ℃/℉

cOST

Condition

2-10/11

Control

output 1/2:

SSR

2-9 Control

type: PID

2-16/19

specification

AL1/2 alarm

operation:

AM1 to AM6,

HBA

2-9 Control

type: P.P,

P.ON, ON.P

2-9 Control

type: ON.ON

1-7/10

Heating/

Cooling

integral time:

2-9 Control

type: ONOF

2-8 Control

output mode

02)