Galaxy Audio MICRO SPOT VC Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Galaxy Audio MICRO SPOT VC. Galaxy Audio MICRO SPOT VC 20. Powered micro spot

BEFORE YOU BEGIN

Before using this product be sure to read and understand all

instructions in this manual pertaining to the model(s) you have

purchased.

DO...

Read this manual

Use a unidirectional microphone

Handle with care

Complete the registration card at the back of the manual

DON'T...

Expose any unit covered in this manual to rain or moisture

Plug-in or unplug the HOT SPOT while it is operating

(doing so may damage your amplifier)

Attempt to make any repairs

nearest authorized repair center). Failure to do so may

void your warranty.

All unpowered HOT SPOTS have a 16 ohm impedance, and like

most professional-type speakers have two jacks which are wired in

parallel (meaning the signal can travel into one jack and out of the

other).Think of each speaker as a "load" added to the amplifier. The

greater the number of speakers, the heavier the load. Adding too

many speakers can overload the amplifier, causing it to overheat

and distort. If the amplifier begins to distort, or if it becomes hot to

the touch, disconnect any extra speakers. One easy way to

determine the load on the amplifier is to use Ohm's law, which

states: "The total impedance of N speakers in parallel is equal to

the reciprocal of the sum of the reciprocals. In equation form:

Page 2

(call Galaxy Audio for the