Frigidaire 000 BTU Air Conditioner FAS226 Manuale di istruzioni per l'installazione
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Condizionatore d'aria Frigidaire 000 BTU Air Conditioner FAS226. Frigidaire 000 BTU Air Conditioner FAS226 9. For heavy duty (fas models) and median (fam models) air conditioners
Anche per Frigidaire 000 BTU Air Conditioner FAS226: Schema di cablaggio (1 pagine)
Stampa la pagina
For Heavy Duty (FAS Models) and
Median (FAM Models) Air Conditioners
Please read ALL instructions before installing.Two people are
recommended to install this product.If a new electrical outlet
is required,have the outlet installed by a qualified electrician
before installing unit. See#5 in Preliminary Instructions
following.
Preliminary instructions
Do the following before starting to install unit.See illustrations
below.
Check dimensions of your unit to determine model type:
Heavy duty (FAS)
Unit Height:
Unit Width:
Min. Window Opening:
Min. Window Width:
Max. Window Width:
1
. Check window opening size - the mounting parts furnished
with this air conditioner are made to install in a wooden
sill double-hung window.The standard parts are for
window dimensions listed above.Open sash to a minimum
of 19"(483mm). (FIG. 1)
2
. Check condition of window - all wood parts of window
must be in good shape and able to firmly hold the needed
screws.If not, make repairs before installing unit.
FIG. 1
1/2" MIN
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
Installation Instructions
Median (FAM)
18.5/8"
17.5/8"
1
1
26
/
"
23
/
2
1
19"
18
/
1
31"
26
/
1
43"
40
/
SASH
19" MIN
WASHER HEAD
LOCKING SCREW
FRAME
ASSEMBLY
(LEFT)
"
SIDE RETAINER
2
"
2
"
2
"
SEAL-BOTTOM RAIL TO UNIT
2
3
. Check your storm windows - if your storm window
frame does not allow the clearance required, correct by
adding a piece of wood as shown in FIG.2, or by removing
storm window while room air conditioner is being installed.
(continued)
STORM WINDOW FRAME OR
OTHER OBSTRUCTION
1
WINDOW SASH SEAL
SAFETY LOCK AND
3/4" LONG HEX HEAD
SCREW
TOP ANGLE
FOAM GASKET
1/2" LONG
SCREWS AND
LOCKNUTS
LOCKNUT
3/4" LONG
FLAT HEAD
BOLT
FIG. 2
SASH
1 1/2" MIN
1/2" MIN
P/N 66121625
FRAME
ASSEMBLY
(LEFT)
WINDOW SUPPORT
BRACKET
SILLANGLE
BRACKET
19" MIN
BOARD THICKNESS AS
REQUIRED, ALONG
ENTIRE STOOL, FASTEN
WITH TWO NAILS OR
SCREWS.