Autonics FXS Series Manuale del prodotto - Pagina 2

Sfoglia online o scarica il pdf Manuale del prodotto per Timer Autonics FXS Series. Autonics FXS Series 5. Din w48xh48mm, preset counter/timer
Anche per Autonics FXS Series: Manuale (8 pagine)

Stampa la pagina
Autonics FXS Series Manuale del prodotto

Ordering Information

This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics website.
FX
❶
S
-
❷
❶ Display digits
4: 4-digit
5: 5-digit
❷ Output
1P: 1-stage setting (4-digit)
I: indicator (5-digit)
Product Components
• Product (+ bracket)
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
11.1
81.2
□48
9.3
■ Bracket
□49.5
30.5
60.3
Connections
■ FX4S-1P□
SOLID
STATE OUT:
30 VDCᜡ
12 VDCᜡ
100mA
CP1
CP2
50mA
0 VDCᜡ
RESET
7
8
9
10
11
12
INHIBIT
1
2
3
4
5
6
CONTACT:
SOURCE
250 VACᜠ 3A,
100 - 240 VACᜠ 50 / 60 Hz 4.6 VA
30 VDCᜡ 3A
/
RESISTIVE LOAD
24 VACᜠ 50 / 60 Hz 3.5 VA,
24 - 48 VDCᜡ 2.3 W
• INHIBIT: In case of timer mode, this terminal is for time hold.
- Voltage input (PNP): connect with 12 VDCᜡ
- No-voltage input (NPN): connect with 0 VDCᜡ
Error
• When error occurs, the output turns OFF.
• Indicator model does not have error display function.
Display
Description
Troubleshooting
Setting value = 0
Change the setting value anything but 0.
ERR0
❸
❸ Power supply
2: 24 VACᜠ ± 10 % 50 / 60 Hz,
24 - 48 VDCᜡ ± 10 %
4: 100 - 240 VACᜠ ± 10 % 50 / 60 Hz
• Instruction manual
■ Panel cut-out
≥ 65
■ FX5S-I□
12 VDCᜡ
CP1
CP2
50mA
0 VDCᜡ
RESET
7
8
9
10
11
INHIBIT
1
2
3
4
5
SOURCE
≤ 3.8 VA
100 - 240 VACᜠ 50 / 60 Hz
/
3 VA,
24 VACᜠ 50 / 60 Hz
1.8 W
24 - 48 VDCᜡ

Specifications

Model
Display digits
Character size
Max. counting speed
Return time
Min. signal width
Input logic
One-shot output time
Error
Contact control output
Type
Capacity
Solid-state
control output
Capacity
Unit weight (packaged) ≈ 110 g (≈ 171 g)
Approval
Voltage type
Power supply
Power consumption
(FX4S-1P□)
Power consumption
(FX5S-I□)
External supply power
Memory retention
Insulation resistance
Dielectric strength
Noise immunity
Vibration
Vibration (malfunction)
Shock
Shock (malfunction)
Relay life cycle
Ambient temperature
Ambient humidity
Protection rating
Mode Setting
12
RUN
6
[RESET] 3 sec
Dot for Decimal Point & Hour / Min / Second
• If there is no RESET key or DIP switch input for 60 sec, it returns to RUN mode.
• [RESET] key: Setting mode ↔ RUN mode
Move the digit when changing the setting value.
■ Decimal point of counter
Parameter
C1-1 Setting mode
Decimal point
C1-2
setting
■ Dot for Hour / Min / Second of timer
Parameter
T1-1 Setting mode
Setting of dot for
T1-2
Hour / Min / Sec
Output Operation Mode
For the detailed timing chart for operation output mode, refer to the manual.
FX4S-1P□
FX5S-I□
4-digit
5-digit
W 3.8 × H 7.6 mm
W 4 × H 8 mm
1 / 30 / 2 k / 5 kcps
≤ 500 ms
INHIBIT, RESET: ≈ 20 ms
Voltage input (PNP) - input impedance: ≤ 10.8 kΩ,
[H]: 5 - 30 VDCᜡ, [L]: 0 - 2 VDCᜡ
No-voltage input (NPN) - short-circuit impedance: ≤ 470 Ω,
short-circuit residual voltage: ≤ 1 VDCᜡ
open-circuit impedance: ≥ 100 kΩ
0.05 to 5 sec
Repeat / SET / voltage / Temp.: ≤ ± 0.01 % ± 0.05 s
Relay
-
Instantaneous SPDT (1c) × 1
-
250 VACᜠ 3 A, 30 VDCᜡ 3 A
-
resistive load
NPN open collector × 1
-
≤ 30 VDCᜡ, 100 mA
-
≈ 95 g (≈ 156 g)
ᜢ ᜧ ᜫ
AC voltage
AC / DC voltage
24 VACᜠ ± 10 % 50 / 60 Hz,
100 - 240 VACᜠ ± 10 % 50 / 60 Hz
24 - 48 VDCᜡ ± 10 %
AC: ≤ 3.5 VA
≤ 4.6 VA
DC: ≤ 2.3 W
AC: ≤ 3 VA
≤ 3.8 VA
DC: ≤ 1.8 W
≤ 12 VDCᜡ ± 10 % 50 mA
≈ 10 years (non-volatile semiconductor memory type)
≥ 100 MΩ (500 VDCᜡ megger)
Between all terminals and case: 2,000 VACᜠ 50 / 60 Hz for 1 minute
± 2 kV square wave noise (pulse
± 500 V square wave noise (pulse
width: 1 ㎲) by the noise simulator
width: 1 ㎲) by the noise simulator
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute)
in each X, Y, Z direction for 1 hour
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute) in
each X, Y, Z direction for 10 min
300 m/s
(≈ 30 G) in each X, Y, Z direction for 3 times
2
100 m/s
(≈ 10 G) in each X, Y, Z direction for 3 times
2
Mechanical: ≥ 5,000,000 operations
Electrical: ≥ 100,000 operations (250 VACᜠ 3 A resistive load)
-10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation)
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
IP20 (front part, IEC standard)
Dot for Decimal Point &
→
[RESET] 3 sec
Hour / Min / Second
Display
Setting range
-
DP
[FX4S-1P]
----, ---.-, --.--, -.---
----
[FX5S-I]
-----, ----.-, ---.--, --.---, -.----
-----
Display
Setting range
-
DP
CLR: Not divided with dot 5959: 59 m 59 s
SET: Divided with dot
CLR
→ RUN
Setting example
-
0.59.59: 59 m 59 s