DynaQuip Controls WaterCop Manuale d'uso e manuale d'installazione
Sfoglia online o scarica il pdf Manuale d'uso e manuale d'installazione per Unità di controllo DynaQuip Controls WaterCop. DynaQuip Controls WaterCop 8. Emergency leak detection and water shut-off system
Stampa la paginaOwner's Manual / Installation Guide
ABSOLUTE AUTOMATION INC. 1-800-296-3910
Sm Description
The WaterCop
®
System is designed to detect leaks in
your plumbing system at predetermined locations, and
automatically shut off the water supply to help effec-
tively reduce the chances of major water damage
associated with a leak.
System Components
The WaterCop
®
System is composed of two basic
parts:
®
• The WaterCop
- A motorized ball valve that
houses a wireless radio receiver which
automatically turns off your water supply when the
WaterHound detects water.
• The WaterHound - A moisture sensor which
houses a wireless radio transmitter which detects
water from a leak or overflow and sends a signal
®
to the WaterCop
to turn off your water supply.
General Safety Information
Warning
Do not apply electrical power to the unit unless the unit
is fully assembled (as it shipped). Failure to do so
could result in personal injury and/or damage to the
unit.
Warning
Disconnect power source before working on or
servicing the unit. Failure to do so could result in
personal injury.
Caution
It is strongly recommended that eye
protection be worn while servicing
the system. Failure to do so could
result in personal injury.
How the System Works
The WaterHounds constantly monitor their selected
areas for accumulating moisture. When a leak is
detected, a WaterHound will send a radio frequency
®
signal to the WaterCop
the water supply to the home. The WaterCop
will remain closed until it is manually reset.
The WaterHound is a battery powered device enabling
unit instructing it to shut off
®
valve