DC Technologies DCX-50 Plus Manuale d'uso dell'estensione - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso dell'estensione per Estensore DC Technologies DCX-50 Plus. DC Technologies DCX-50 Plus 10.

As you Camp-On, for e.g.302, at getting no reply, whenever the person at 302 finishes
its next call, you'll get a Camp-On ring. As you pick up the receiver, Ext.302 will ring and
your contact will be established.
Extension Break-In
All extension can break into an outgoing call by dialing a '6' after a busy tone is received
on calling an extension number.
If e.g., you dial ext. 302 while it is already busy with any other extension or a trunk line,
you will receive the ordinary busy tone. To break in to 302, you will now dial 6. Ext, 302
and other line will receive three short tones. After 4 second, if it's another line is a trunk,
it will go on hold with music or if it's another extension, it simply gets disconnected. Now
you are automatically connected with ext, 302.
Ext. 302 can retrieve its line on hold by dialing while the call is in progress and by hook
flash while receiving the dial tone.
Note: Break-in activated if called number has trunk on hold or is already in conference with another
group.
Extension Diversion
An extension diversion number can be diverted to receive all call at another extension.
Dialing '8' from the extension accomplish the diversion and rediversion.
For example, dialing 8-20-46 and putting down telephone do diverting your extension
with number 320 to another extension with number 346. This extension will now have a
special tone instead of the dial tone until it is rediverted.
To, redivert, you can dial 8-20-20 and receive the normal dial tone.
Diversion of telephone number can only be done by its number or the number where it
is diverted.
If your extension is 305, which is diverted to Ext. 302, which is in turn routed to Ext. 303,
all calls made to you i.e. 305 will be received by Ext. 302 and all 302's calls will be
received by 303.
Note: Trunk ring back is not possible in diversion mode.
Extension Transfer
An extension connected to another can be transferred to a third extension.