activTek INDUCT 500 Manuale d'uso - Pagina 2
Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria activTek INDUCT 500. activTek INDUCT 500 4. Reduces odors, visible smoke in the air, and treats contamination on surfaces
Stampa la pagina
INSTALLING THE UNIT
WARNING: Disconnect power to the AC unit at the
breaker or fuse panel before installing unit.
WARNING: It is recommended that this unit be
installed by a licensed HVAC contractor
to ensure proper installation and protect
your warranty.
1. Installation will require removal of the PTAC air unit
cover. Please refer to your PTAC unit's owner's
manual for detailed instructions.
2. Placement of the INDUCT 500 varies depending on
your PTAC unit design. However, the INDUCT 500
should be placed directly in the unit's airflow (see
NOTE on this page).
3. Connect the Induct 500's power supply cord
by inserting the plug into power inlet (a). Spin
the retainer clip (b) up and place power supply
cord under retainer. Return retainer clip to its
original position.
a
b
NOTE: ACTIVTEK INDUCT 500 PLACEMENT
Air Flow:
The INDUCT 500 should
be placed in the direct
air flow of your PTAC
unit. Optimum placement
will allow air to pass into
the INDUCT 500 from
one side and exit on the
opposite side.
(See diagram.)
4. Place the power cord in an out-of-the-way location
toward the electrical outlet.
5. Replace the cover on the PTAC air unit and
plug in the INDUCT 500's power cord into the
electrical outlet.
Downward View