dynarex 10441 Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Arredamento per interni dynarex 10441. dynarex 10441 4. Air mattress with pump

Stampa la pagina

PUMP

10441 & 10448 MATTRESS

10449 MATTRESS

(1) Pillow

(5) Male quick connector

(2) Cover

(6) Protective cap of connector

(3) Fixing belt

(7) Air tubing

(4) Low air loss holes

(8) CPR valve

(9) Foam Base

1 - Power switch

2 - Presssure adjust knob

3 - Normal pressure indicator (green)

4 - Low pressure indicator (amber)

5 - Static control

6 - Air pressure valve

1 - Pillow function cells

2 - Cover

3 - Fixing belt

4 - Low air loss holes

5 - Male quick connector

6 - Air tubing

7 - CPR Valve

STORAGE

1. Switch off power from main and unplug,

separate the pump from the mattress and

place the mattress flat.

2. Fold the mattress in two from mattress foot

to head.

3. Allow time for air to escape from mattress to

reduce storage space.

4. Close the protective cap cover on the quick

connector.

GENERAL CONDITIONS OF DISPOSAL

Dispose of the device in the appropriate

disposal areas for recycling. At the end of its

life, the product must not be disposed of along

with other domestic waste.

TROUBLESHOOTING

If your questions can't be answered with below information, please contact your

local agent directly. They might require a technician to take care of the problem.

No lights on unit

Low pressure alert

Patient's body is sagging

in the middle/bottoming out

Control lock up or "freeze"

MAINTENANCE

In case of repair, use only original spare parts

and accessories. For spare parts and

accessories, please contact Dynarex or an

authorized dealer.

CLEANING AND DISINFECTION

WARNING! Unplug the pump before

starting the cleaning procedure.

1. Clean the mattress with mild soap.

2. Do not immerse or soak pump unit.

3. After cleaning, dry the mattress without

direct sunlight exposure.

4. Check that the connection tubes are not

obstructed by dust or other objects. Use a

soft swab to clean the tubes if necessary.

NOTE: Never use acids, alkalis or solvents

such as acetone to clean the mattress.

Check control unit is connect to the main power supply and that

the unit is switched on.

Check quick blow fuse on the control unit or main plug fuse.

Check main power to the control unit and that the plug is switched.

Check mattress air supply connector is connected to the pump unit

correctly.

Check CPR connector is connected properly.

Under the mattress cover check all "T" & "L" connectors are

connected to the air tubes.

Check the connector tubes for kinks, crimps or damage.

Increase the value of the comfort the setting. Wait a couple of

minutes so pressure can stabilize before making another change.

Turn the control unit off and unplug the pump. Wait a few minutes

and plug the control unit back in. Turn on the control unit.