dynarex 10448 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Arredamento per interni dynarex 10448. dynarex 10448 4. Air mattress with pump

Stampa la pagina

INTRODUCTION

Thank you for purchasing the DynaRest

™

AirFloat 100 Air Mattress with Pump. This

user's manual provides instructions on how to

correctly use the product and gives valuable

advice regarding your safety. Please read

through the manual carefully before using the

product. Should you have any questions,

please contact your dealer for advice and

assistance.

WARNINGS

Keep this manual in a safe place and refer to

the manual before use and under proper

medical supervision. Improper operation of

this system may cause damage to the product

and possible injury to the user.

• Do not use this product or any available

optional equipment without first completely

reading and understanding this instruction

manual. If you are unable to understand the

warnings, cautions or instructions, please

contact a healthcare professional, dealer or

authorized technician before attempting to

use this equipment, otherwise injury or

damage may occur.

• Only qualified personnel trained in the

treatment and prevention of bedsores

should operate this device.

• Attention has to be paid to a potential

danger that requires correct procedures or

practices in order to prevent personal injury.

• Close supervision is necessary when this

product is used by, on, or near children or

persons with a disability.

• Keep the unit and cord away from heat

sources and liquids.

• Never block the air openings of the product

or place it on a soft surface, such as a bed

or couch, where the air openings may be

blocked. Keep the air openings free of lint,

hair and the like.

• Do not use outdoors or operate where

aerosol (spray) products are being used.

INTENDED USE

The DynaRest

AirFloat 100 Air Mattress is

™

designed for bed sore and wound care therapy

treatment and prevention, which may occur

during an extended hospital stay and nursing

home / long term care environment.

• Never drop or insert any object into any

opening or hose.

• Do not remove the housing of the Control

Unit to avoid electrical shock. All

disassembly or repair should be done by

professional technicians.

• Never operate this product if it has a

damaged cord or plug, if it is not working

properly, if it has been dropped or damaged,

or dropped into water. Return the product to

a service center for examination or repair.

• Connect this product to a properly grounded

outlet only.

• Make sure the pump unit is suitable for the

local power voltage.

• Avoid damaging the plug or cables when

moving the patient or bed.

• Ensure that the cables are safe and tidy and

not caught in the bed mechanism or resting

on the floor.

• Do not allow children to play with or operate

the pump or mattress.

• Do not use this product for any purpose

other then what is indicated in this manual.

• Dynarex declines all liability for any

consequences resulting from incorrect use

of this product and from any unauthorized

alterations of this product.

• The manufacturer reserves the right to

change the information contained in this

document without prior notice.

CONTROLS AND FEATURES

FIRM

SOFT

lb.

350

120

320

150

180

280

210

250

POWER

1. Power Switch

OFF

Turn ON/OFF the power, the

pump will start/stop operation.

2. Pressure Adjust Knob

FIRM

SOFT

(adjustable by patient's

weight)

Turn the Pressure Adjust to

set a comfortable pressure

level by using the weight scale

as a guide.

3. Normal Pressure Indicator

NORMAL PRESSURE

A visible indicator (green)

shows the pressure has

reached a preset level.

NORMAL PRESSURE

LOW PRESSURE

OFF

DynaRest

Airfloat 100

™

STATIC

4. Low Pressure Indicator

LOW PRESSURE

A visible indicator (amber)

warns the pressure is below

a preset level.

5. Mode Toggle Switch

Alternating

Turn the switch to

"Alternating" to turn on the

alternating pressure function.

Static

Turn the switch to "Static" to

turn on the static mode.

NOTE: In static mode, the

mattress provides a firm

surface that makes it easier

for the patient to transfer or

reposition. The static mode

helps prevent the patient from

bottoming out when in a

sitting position.

NOTE: After toggling the

Mode Switch it might take up

to 6 minutes for the new

mode to start