Galaxy Press GS-207M Manuale operativo

Sfoglia online o scarica il pdf Manuale operativo per Utensile elettrico Galaxy Press GS-207M. Galaxy Press GS-207M 19.

1. Read all instructions.

2. Use heat press only for its intended use.

3. To reduce the risk of electric shock, do not immerse the heat press in water or other liquids.

4. Never pull cord to disconnect from outlet, instead grasp plug and pull to disconnect.

5. Do not allow cord to touch hot surfaces, allow heat press to cool completely before storing.

6. Do not operate heat press with a damaged cord or if the equipment has been dropped or

damaged.To reduce the risk of electric shock, do not disassemble or attempt to repair the

heat press. Take it to a qualified service person for examination and repair. Incorrect

assembly or repair could increase the risk of fire, electric shock, or injury to persons when the

equipment is used.

7. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

8. Close supervision is necessary for any heat press being used by or near children. Do not

leave equipment unattended while connected.

9. Burns can occur when touching hot metal parts.

10. To reduce the likelihood of circuit overload, do not operate other high voltage equipment on

the same circuit.

11. If an extension cord is necessary, then a 20 amperage rated cord should be used. Cords

rated for less amperage may overheat. Care should be taken to arrange the cord so that it

cannot be pulled or tripped over.

Operation Manual

(GS-207M)

Safety Instructions

When using your heat press,

basic precautions should always be followed,

including the following: