ActivUP AU302UD Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Tapis roulant ActivUP AU302UD. ActivUP AU302UD 14. Walking treadmill

Maintenance

Adjustment of running belt have two functions: to center the running belt

and to adjust its tension. Running belt adjustment has already been done

at the factory, but after use the running belt will be stretched and may run

with off center position causing friction trim and rear cover

damage. Running belt being stretched during use is normal. If you step

off the treadmill while leaving it running it should return to center. If it

doesn't, you might need to do some adjustment:

1. Start the treadmill and raise the speed to 6 km/h. Observe the gap

between belt and sides at left and right.

If the belt is leaning to the left, use hex wrench to rotate the screw

clockwise ¼ turn.

If the belt is leaning towards the right side, use the hex wrench,

rotate right screw clockwise 1/4 turn.

4. If the running belt is still not in the middle, repeat the above action,

until the running belt is centered. If it becomes too tight, loosen

tension by rotating counter clockwise equally on both left and right

screw. Center the running belt to the middle, adjust speed to 8

km/h, and observe deviations running belt and running smooth. If

there are deviations, repeat the adjustment steps.

ActivUP user guide

Page: 10 /14