High Per 49CC MINI Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Veicolo fuoristrada High Per 49CC MINI. High Per 49CC MINI 20.

Remove contents from box. Remove the foam separators that protect the components from

damage during shipping. Inspect the contents of the box for scratches in the paint, dents or

kinked cables that may occurr during shipping. Because the product was 85 percent

assembled and packed at the factory, there should not be any problems, even if the box has a

few scars or dents.

Estimated Assembly and Set-Up Time

We recommend assembly by an adult with experience in motorbike or bicycle mechanics.

Allow up to 30-40 minutes for assembly.

Required Tools

Some tools may be supplied; however, we recommend the use of mechanic's grade tools. Use

the supplied tools only as a last resort.

The list of tool required is as follows

·Open end wrench 10mm / 13mm/ 17mm / 22mm

·Allen wrench 5mm / 6mm/ 8mm

·Bicycle style tire pump with pressure gauge

ASSEMLY REAR WHEEL 6"

A: Nut M10 2PCS

B: Spring Washer Φ10 2PCS

C: Washer Φ10 2PCS

D: Bush Φ22×1.8×139 1pcs (Left)

Φ22×1.8×139 1pcs(Right)

E:Rear wheel 2PCS

F:Sleeve Φ22×1.8×10 2PCS

G:Rear axle

1.Install the sleeve(F) to the rear axle (G).

2.Fix the rear wheel (E) through the axle (G).

3.Mount the bush(D),flat washer(C),spring

washer (B) and nut(A) in sequence, then

tighten the nut securely with 17mm open end

wrench.

A: Nut M14 2pcs

B: Washer Φ14 2pcs

C: Rear wheel

D: Sleeve Φ22×1.8×112 2pcs

E: Rear axle

F: Pin 2pcs

1. Install the sleeve(D) to the rear axle (E).

2. Put the pin(F) into the groove on the axle.

3. Fix the wheel(C) through the axle.

4. Mount the spring washer (B) and then

tighten the nut(A) securely with 22mm open

end wrench.