Autool CT400 Manuale d'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di prova Autool CT400. Autool CT400 14. Injector cleaner & tester

C. Install the fuel distributor assembly and the fuel injectors on the Top assem-

bly plate and tighten and fix it with a fixed screw nut and a fixed screw sleeve.

Get ready to test.

D. Select 12v/70v/120v according to injector type.

3.2.2 Steps:

Item 02 idle speed test:

● Connect the quick connector of the black outlet hose on the machine with

the male end connector on the fuel distributor assembly, and insert the pulse

line of the fuel injector.

● Press the item selection up and down keys to select the "02 Idle Speed

Test" item.

● Press the working time up and down keys to set the time. （Normally set to

10 minutes）

● Press the "run" key to start working.

● Rotate the pressure adjustment knob to adjust the pressure to 2-5 kg.(In the

electronic spraying system, the oil pressure is generally 2-5 kg).

● Press the up and down keys to select the appropriate pulse width. (The

system defaults to 3MS, generally adjusted to 3MS).

● The working time will gradually decrease, and when it reaches 0, the

system will stop automatically.

03 middle-speed test:

● Press the item selection up and down keys to select the "03 middle-speed

test" item.

● Press the RUN button.

● The rest of the operation steps are consistent with item 02.

04 High-speed tests:

● Press the item selection up and down keys to select the "04 High-speed

test" item.

● Press the RUN button.

● The rest of the operation steps are consistent with item 02

05 Accelerated test:

● Press the project selection up and down keys to select the "05 Accelerated

test" item.

● Press the RUN button.

Notes：

1)The fuel pressure, working time and pulse width are automatically set by the

system. The time system presets 10s as a loop cycle, which can be set by the

user.