Autopage RF-225 Manuale operativo - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo per Avviamento a distanza Autopage RF-225. Autopage RF-225 8. Professional keyless entry with vehicle security system option

Stampa la pagina

Arming feature, which allows the security system to arm 30 seconds after

the last door is closed. Operation is as follows.

1. Turn the ignition to the "OFF" position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast

for 30 seconds. If you reopen any door / hood / trunk, the security

system LED will stop flashing. It will begin flashing again once all

vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will

automatically "ARM". The siren or horn will chirp [1] time and the

parking lights will flash [1] time.

PASSIVE DOOR LOCKING: Programmable

The vehicle doors will automatically lock after passive arming cycle has been

completed.

ACTIVE UN-LOCKING – UNLOCK & DISARM: (OPTIONAL)

1. Press the

button on the transmitter.

2. The siren or horn will chirp twice and parking lights will flash twice to

indicate that the security system is now disarmed. The vehicle doors will

unlock when interfaced with the security system.

TAMPER DISARMING: (OPTIONAL). If the alarm is triggered; Upon

disarming the system the siren or horn will chirp 4 times and parking lights

will flash 3 times. This will indicate that the alarm has been triggered while

armed.

TWO STEP DOOR UNLOCK: (OPTIONAL) This feature will independently

unlock the driver's door only when disarming the security system. Pushing

the

button on the transmitter a second time within 3 seconds will unlock

the entire vehicle. Optional

AUTOMATIC RE-LOCKING or RE-ARM: If this feature is selected, the

security system will automatically re-arm itself 60 seconds after disarming

with remote transmitter. Automatic rearm will cancel if any door is opened

before the 60 seconds timer has elapsed.

DISARMING WITHOUT A TRANSMITTER

The Override function may be used if the remote transmitter is lost or

inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm

will sound.)

2. Within 10 seconds push and release the valet switch

The alarm will stop sounding and enter the disarm mode. You can now

start and operate the vehicle normally.

VALET MODE:

The valet switch allows you to temporarily bypass all alarm functions

eliminating the need to hand your transmitter to parking a ttendants or

garage mechanics. When the system is in valet mode, all alarm functions

are bypassed, however, the remote panic feature and remote door locks

will remain operational.

Enter Valet Mode:

1. Turn the ignition to "ON" position.

2. Push and hold valet switch for 2 seconds or until the LED turns on.

The LED will remain on as long as the system is in 'valet mode'.

Exit Valet Mode:

1. Return to normal operation, turn ignition 'ON'.

2. Push and hold valet switch for 2 seconds; the LED will turn off

indicating the system is exiting the valet mode.