Autopage C3-RS-915 LCD Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Allarme auto Autopage C3-RS-915 LCD. Autopage C3-RS-915 LCD 17. Professional 2-way lcd remote car starter & alarm system with built in temperature & voltage sensor and two-way serial port data link

Stampa la pagina

Autopage C3-RS-915 LCD Manuale operativo

SVMASTER

TWO STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver's door only when

disarming the security system. Pushing the

doors.

AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in 60

seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before the

60 seconds timer has elapsed.

H. DISARMING WITHOUT A TRANSMITTER

OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to the 'ON' position.

2. (Alarm will sound.)

3. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the

disarm mode. You can now start and operate the vehicle normally.

OVERRIDE THE ALARM WITH PASSWORD PIN CODE:

Unlike valet switch that can easily be found and defeated, this security system allows the consumer

to program a password pin code offering a higher level of security.

1. Enter the vehicle and turn the ignition switch to 'ON' position. (Alarm will sound.)

2. Within 5 seconds, enter your chosen first digit code by pressing and releasing the Valet Switch.

(When finished above procedures, system's siren will stop alarming, lights will stop flashing, but

the vehicle can't be started.)

3. Within 15 seconds of the last digit code enter (the 1st code), then turn the Ignition Switch "OFF"

and then "ON".

4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet

Switch.

5. Turn the ignition switch "OFF" position. 4 Chirps from siren/horn and 3 flashes from the parking

light indicate the system has disarmed.

Note: You must override the alarm within 60 seconds. If not, the system will automatically re-arm.

EXAMPLE: To Override the System with the Password Code 83,

1. Enter the vehicle and turn the ignition switch to the 'ON' position.

(Alarm will sound.)

2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the system's siren

will stop alarming, lights stop flashing, but the vehicle cannot be started or driven away.)

3. Within 15 seconds of entering the last digit code enter (the 1

and then "ON".

4. Within 15 seconds, Press and Release the Valet Switch 3 times.

5. Turn the Ignition Switch to the "Off" position. 4 Chirps form siren/horn and 3 flashes from the parking

lights will indicate the system has disarmed.

VALET MODE:

(System is in Disarm Mode)

The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your

transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions

and remote start functions are bypassed, however, the remote panic feature and remote door locks will

remain operational. To use the valet mode, the system must first be disarmed either by using your remote

transmitter, or by operating the Manual Override sequence.

SVMASTER

C3 RS915 REV. O1

button a second time within 3 seconds will unlock the other

(Factory Default Setting)

code), turn the Ignition Switch "Off"

http://www.msvmaster.lv