DCI Cascade 1040 Manuale di avvio rapido
Sfoglia online o scarica il pdf Manuale di avvio rapido per Arredamento per interni DCI Cascade 1040. DCI Cascade 1040 2. Potentiometer and soft limit adjustment
Stampa la paginaPOTENTIOMETER AND SOFT LIMIT
ADJUSTMENT
UPPER POTENTIOMETER: SEAT BACK INCLINE-RECLINE (A-DEC)
Starting Position – Cascade 1040, Performer
Seat Back Fully
Disconnect drive mechanism from potentiometer and remove old potentiometer, and then reinstall
On 1040 chair – Turn the potentiometer shaft
clockwise
until it will no longer turn. Then turn the
shaft counterclockwise 1/8th of a turn and reconnect
the drive shaft.
LOWER POTENTIOMETER: BASE UP-DOWN (A-DEC CASCADE, DECADE)
1. Remove the mounting screw from the assembly.
2. Rotate the potentiometer gear clockwise until rotation
stops.
3. Align the potentiometer assembly, and then rotate
the potentiometer gear counterclockwise two teeth
relative to one tooth on the large drive gear.
4. Reinstall the mounting screw and verify that all
the electrical connections to the limit switch and
potentiometer are properly connected.
UPPER POTENTIOMETER: SEAT BACK INCLINE-RECLINE (PELTON & CRANE)
Reclined
potentiometer into bracket. Prior to connecting drive mechanism:
Chair Fully
Seat Back Fully
Starting Position – Decade 1011/1021
On 1021/Decade chairs – Turn the potentiometer shaft
counterclockwise
the shaft clockwise 1/8th of a turn and reconnect the
drive shaft.
Starting Position
Lowered
Starting Position
Inclined
Seat Back Fully
Inclined
until it will no longer turn. Then turn
Large Drive
Gear
Mounting
Screw
Potentiometer
Gear