Galil DMC-3xx11 Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Amplificatore Galil DMC-3xx11. Galil DMC-3xx11 17. Dmc-3xx1 series integrated amplifier
Stampa la pagina- 1. Amplifier Installation
- 1. Chapter 1 Overview
- 2. Using this Manual
- 2. Chapter 2 Installation
- 2. Operating Environment
- 2. Mounting Location
- 2. Unpacking the Controller
- 2. Mounting the Controller
- 2. Powering the Controller
- 2. Power Connector
- 2. Motor Connector
- 2. Communication Connection
- 2. Additional Wiring
- 2. Ethernet Connection
- 3. Appendix: Specifications
- 3. Fault Information
a.
Recommended shielded Cat 5 STP cable. Straight-through or Cross-over.
6. RS-232 straight-through serial cable
a.
9 pin D-sub female
7. Molex pin Crimp Tool
8. Additional cables may be required for connection to motors, external amplifiers, digital or
analog I/O, and other devices. See the full DMC-3xx1x User Manual for further information.
9. Disconnect switch or circuit breaker for AC power to DC Power Supply
Unpacking the Controller
Caution:
The DMC-3xx1x motion controller and included internal amplifier include electrostatic
sensitive components. Observe standard precautions for handling ESD sensitive devices
when handling the controller.
1. Verify that the following components have been shipped along the motion controller.
•
Connectors and mating pins for motor power and amplifier power.
Qty 1 – 4 pin molex connectors (DMC-3xx12)
o
Qty 1 – 2 pin molex connector (DMC-3xx11 and DMC-3xx12)
o
Qty 1 – 4 pin molex connector (DMC-3xx10)
o
•
Galil Software Installation CD
Note:
Connectors and/or software installation CD may not be shipped to existing OEM
customers.
2. Check that no visible damage has occurred to the controller, or internal amplifiers. If any
damage has occurred to the controller, or the components shipped with the controller, contact
Galil Motion Control immediately. Contact information can be found in the beginning of this
manual.
3. Verify the controller that has been shipped to you is in fact the controller that you have
ordered from Galil or your authorized Galil distributor. To do this, check the labeling on the
controller and compare it to the part number that was ordered.
Figure 1: Label for DMC-3xx10
Figure 2: Label for DMC-3xx11