High-End Technology F16 Manuale di istruzioni per il montaggio - Pagina 16
Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Giocattolo High-End Technology F16. High-End Technology F16 18. High-end technology f16 for electric ducted fan
Stampa la paginaSettings:
C.G. 75 mm from the leading edge of the wing.
Elevator throws 11 mm up 11mm down. Use 50% exponential
Ailerons throws 11 mm up 11 mm down. Use 20% exponential.
Set the Wing incidence, set the main wings level, the elevons must be set to 3 degrees up.
This means that the trailing edge from the elevon should be set 6 mm higher than its leading
edge. You can do this by placing the main wings level on two horizontal blocks. And
measure the height of the leading- and trailing-edge from the elevon with a ruler.
First Flight.
Use a bungee to start the plane. Before start is good to use some up trim. After start level the
plane don't attempt to turn, climb and trim the plane. The F16 can be flown very slow with a
high AOT But never make turns with a high angle of attack (nose high position) You risk to
drop a wing. Top speed is over 100 Mph.
You will find the airplane is very nimble but has excellent stability. Loops and snap
rolls are easily obtained with adequate entry speeds.. Just remember to land level;
as to avoid damage to the plane . Happy Flying.
Although the F16 is a stable airplane, it is not a trainer or first
EDF airplane. This airplane is capable of very high speeds and
therefore can cause serious personal injury and property
damage. We strongly urge you to seek the help of an AMA
approved instructor if this is your first aircraft of this type.
Fly in suitable areas for a high-speed aircraft such as an AMA
High-end Technology Holland assumes no liability for the
operation or performance of this product. It is the responsibility
of the operator to use this product in a safe and responsible
manner.
WARNING!
Please use common sense
approved field.