AutoPolar PolarFIS PF04 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Automobile Accessories AutoPolar PolarFIS PF04. AutoPolar PolarFIS PF04 2.

Stampa la pagina

1.- Preparing your PolarFIS device

Before install your PolarFIS device, you must update it to the last firmware version

available for your vehicle type, otherwise PolarFIS may malfunction. Read carefully these

instructions:



Access our website (www.autopolar.net)



Download the UpdaterTool software available on our website



Once downloaded, run the UpdaterTool software



Connect the USB cable to the computer and then to the PolarFIS device



After being detected, press UPDATE button and select the firmware compatible

with your vehicle.

IMPORTANT :

PolarFIS supports 14 languages, be sure to select your

language if available

2.- Installing your PolarFIS device

The installation procedure is very easy, and does not require any special tools, just follow

the next steps:



Check that there is no device connected to the OBD2 port of your vehicle



Locate in your vehicle the Gateway unit



Disconnect cable connected to Gateway



Connect PolarFIS cable black connector to your PolarFIS unit, and red

connector to the vehicle gateway



Connect the Gateway removed connector to your PolarFIS unit

IMPORTANT :

Before connect PolarFIS to your vehicle, it is

recommended to disconnect your vehicle battery or at least switch

off ignition.

Make sure that connectors are correctly tightened, sometimes it

requires strong pressure to fit. Check entire connections. For

assembling manuals, please check our website at

3.- Additional information

Depending of which PolarFIS model and cluster type, PolarFIS menu will appear in

different place:



PolarFIS PF04 (Red cluster) New menu called "POLAR FIS" will be created



PolarFIS PF04 (White and Color cluster) PolarFIS screen will be shown in the

telephone menu



PolarFIS PF04 (Audi 8P and 8J) PolarFIS screen will be shown in the audio



PolarFIS PF05 (FIS and Virtual Cockpit cluster) PolarFIS screen will be shown

in the audio menu

AutoPolar