2HEAT RF Series Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Termostato 2HEAT RF Series. 2HEAT RF Series 11.
Stampa la paginaSetting...
、
3
Setting of self-established program Set 7-days self-established program as well
as the control temperature for each period.
A. Set the function change-over switch to
shows the program setting icon
B. The icon and number showing the weekday flash, and press
the date numerical value, press
，
C. At this time the cursor from zero point to 1 and the original temperature setting mode
( the temperature mode icon on the left of the temperature number ) begin to flash, press
key or
temperature mode display for this one hour period will be changed into the selected
temperature mode (Double solid frame for the comfortable temperature, single solid
frame plus single hollow frame for the economic temperature, double hollow frame for
the antifreeze temperature), and move to set next one hour temperature
D. Repeat the steps above until complete to set all temperature modes in 24 hours, then
return to the date selection mode, and keep pressing
program setting mode for every hour can quit from the temperature setting for the
rest time period. Enter into the date selection mode directly again, the rest unset part of
temperature will remain as the original default temperature or the temperature set before;
E. When the date cursor starts flashing again, it enters a new setting cycle for some day
F. Finish the temperature setting, the same as the F Clause in "Setting of date and time"
The modified time/temp erature program will be remembered as the customer's
self-established program. When the function change-over switch returns to AUTO, the
controller operates the customer's self-established program and
symbols will be displayed at the working mode display area in order to distinguish from
the ex-work preset program.
Copy the program for one day
After entering a day program you can copy this into another day to save time when
creating a weekly program: For example, if you want to copy the program of Monday to
Thursday, the methods are as follows:
A. Select the program for Monday: With the selector on "AUTO PROG", press
（
key The outer frame for Monday flashes
for 3 seconds until the
B. Copy to Thursday: While pressing
，
same time and select to Thursday, then release
to finish the copying and the
，
cursor flashes the setting of the day can be continued through
the
.
C. Copying for other days, please repeat from the Step A to B.
.
key to confirm and then move to next setting
key to select the temperature press
：
word appears on the screen
，
：
，
position and screen appearance display area
，
key to confirm and then the
）
to select Monday and press
；
key constantly, press
key or
。
word disappears At this time the Thursday
key or
key to adjust
；
，
；
key for a long time at the
and
program
，
key or
key at the
，
key then release
，
or
key as well as
>6
；
key or
key
key