Dynatech STAR Manuale di istruzioni per l'uso e la manutenzione - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso e la manutenzione per Apparecchiature industriali Dynatech STAR. Dynatech STAR 18. Overspeed governor

Stampa la pagina
INSTRUCTIONS: Star Cod: DYN 09.1.19
Date: 14/12/2022 Revision: 19

1 GENERAL INSTRUCTIONS

STAR overspeed governor by DYNATECH is specially designed to be fitted into the car or sling of the lift and to move
together with them. Thanks to this, the engine room governor, the guide pulley and the mass at the bottom of the
well can be removed.
By using this new concept, the governor moves, whereas the rope remains fixed, anchored to the well ceiling and to
the pit by means of a small-sized tensing system. The information on the set of devices integrating the Governor will
be broadened later on.
It is strictly forbidden:
a) To modify or replace the overspeed governor adjustment spring.
b) Use an overspeed governor in a lift for which it is not intended, or whose features do not correspond to those
marked on the lift (e.g. nominal speed or rope type).
c) To adjust any component of the overspeed governor, except for those parts specified in the manual.
DYNATECH DYNAMICS & TECHNOLOGY, SL will not be liable for any damage caused by failure to observe any of
these general conditions.

2 OVERSPEED GOVERNOR IDENTIFICATION

3 MAIN COMPONENTS

Each governor is composed of the following main elements: two pulleys, a centrifugal system, a locking device, a
casing and an element linking the governor to the car or sling.
Below, a figure representing the governor set is shown:
Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer
area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/
OVERSPEED GOVERNOR IDENTIFICATION STICKER
1
Governor model
2
Governor type
Performance speed
3
(m/s)
4
Rated speed (m/s)
5
Serial number
Rope diameter
6
(mm)
7
QR product traceability code
Marking for market access to
8
member states of the Customs
Union
9
Dynatech address
Quality assurance CE marking
10
and notified body number
EU type examination certificate
11
number
2