DCP SKY1950 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Camino da esterno DCP SKY1950. DCP SKY1950 12. Stone design gas fire pit

INSTALLING BATTERY

1.
Unscrew igniter button.
2.
Insert AAA battery with the positive side facing outwards.
3.
Replace igniter button.
NOTE:
If the burner is not lighting, you may need to replace the battery in the igniter.

CONTROL PANEL

LOW/IGNITE
OPERATING INSTRUCTIONS
NOTE:
Before use, inspect burner, propane tank, and connectors for damage, debris, obstructions, or dirt.
Do not operate if there is any blockage.
During first use, leave fire pit ignited for 20 minutes as lava rocks may pop and cause injury.
1.
Push and turn control knob counterclockwise to low/ignite.
2.
Press the ignitor button repeatedly to light burner.
- If flames do not ignite after 45 seconds, turn o , wait 5 minutes, and try again.
- If necessary, light burner with a match or lighter.
3.
Adjust flames with the control knob. Flames should be between 2 and 10 inches high.
4.
When finished, push and turn control knob clockwise to o position.
5.
Turn valve on propane tank clockwise to turn o gas flow.
8
|
OFF
LOW (BAS)
HIGH
IGNITER PUSH
ALLUMEUR-POUSSER
OFF (ARRÊT)
CONTROL KNOB
HIGH (ÉLEVÉ)
IGNITER:
Push to light burner