Adept Audio ADS10 Manuale di installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione per Subwoofer Adept Audio ADS10. Adept Audio ADS10 14.

Subwoofer Installation Manual

Controls and Connections

Status Light

This light glows when the subwoofer's power is on.

Off/Auto/On Switch

This switch functions only when the power switch

(see pg. 8 "Power Switch") is set to "on." When

this switch and the power switch are both set to

"on," the subwoofer's power will always be on.

When this switch is set to "auto," the subwoofer's

power will come on automatically when it senses

an incoming audio signal. If there is no signal for

15-18 minutes, the subwoofer will automatically

shut off.

Volume

This knob adjusts the subwoofer's volume. Turn it clockwise for full volume. Note that the subwoofer level control in an AV

receiver will also affect how loud the subwoofer plays. With most AV receivers, setting this knob at about halfway up (the 12

o'clock position) will provide a volume level that allows the subwoofer's level to be matched with that of the main speakers.

Phase

Use this knob to adjust the phase of the subwoofer relative to the main speakers. This will help achieve a smoother blend

of the sound of the subwoofer and the main speakers. To adjust it, sit in the chair or couch where you usually listen, and

play some bass-heavy music with the phase knob set to 0. Now play the same music with the knob set to 180. If you hear a

difference, experiment with different settings until the bass sounds smoothest from your chair.

Crossover

Use this knob to set the highest bass frequency the subwoofer will play, from 50 to 150 Hz. If you're using an AV receiver or

surround-sound processor, set this knob at 150 and use the crossover built into the receiver or processor. If the subwoofer

is installed in a stereo system, set this knob as close as possible to the lowest rated bass extension of the main left and right

speakers.