DynaTrap DT1100-CA Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per il controllo degli insetti DynaTrap DT1100-CA. DynaTrap DT1100-CA 2. Mosquito trap

Stampa la pagina

DT1100-CA

OWNER'S MANUAL

MOSQUITO TRAP

Thank you for purchasing

the DYNATRAP

mosquito trap!

This product may be covered by one or more U.S. patents

or pending patent applications. See www.DynaTrap.ca/patents

IMPORTANT, RETAIN FOR FUTURE

REFERENCE: READ CAREFULLY

WARNING: When using electric appliances, basic precautions should always be followed, including the following:

– To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

– Unplug from outlet when not in use and before servicing or cleaning.

– To reduce the risk of electrical shock, do not put appliance in water or other liquid.

– This appliance is provided with double insulation. Use only identical replacement parts.

CAUTION: To reduce the risk of injury from moving parts, unplug before servicing.

WARNING: Risk of Electric Shock.

See instructions for Servicing of Double-Insulated Appliances.

IMPORTANT SAFETY INSTRUCTIONS

Please read these instructions before using the DynaTrap

Insect Trap and keep for future reference.

1. Always turn unit off and disconnect plug before servicing or cleaning.

2. Do not position the unit near heat, gas, oil or other flammable materials.

3. Mount out of reach from children.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or

if it has been dropped into water.

5. The electrical adapter provided with this product is equipped with a 2-conductor cord and a 2-prong. If the plug does not fully fit

in the outlet, contact a qualified electrician. To reduce the risk of electrical shock, only plug into a properly installed outlet. Do

not attempt to defeat this safety feature.

6. Do not insert fingers or any foreign objects into the unit while it is connected to an electrical outlet.

7. Collected insects within the unit may contribute to fire, so clean insects from the unit frequently.

8. Do not clean this product with water spray. Do not place where it can fall into water, or near flammable materials.

9. Do not touch fan while in motion.

10. Do not abuse cord—never carry or hang unit by cord or yank it to disconnect from receptacle. Keep cord away from sharp edges.

11. If using outdoors, use only extension cords with a tag stating "Suitable for Use with Outdoor Appliances".

12. Use only extension cords that have plug and receptacles that match the product plug. Replace or repair damaged cords.

13. Only use attachments recommended or sold by the manufacturer.

14. SERVICING OF DOUBLE-INSULATED APPLIANCES - In a double-insulated appliance, two systems of insulation are provided

instead of grounding. No grounding means is provided on a double insulated appliance, nor should a means for grounding

be added to the appliance. Servicing of a double-insulated appliance requires extreme care and knowledge of the system,

and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical

to those parts in the appliance. A double-insulated appliance is marked with the words "DOUBLE INSULATION", "DOUBLE

INSULATED" or the symbol

INSTALLATION & OPERATING INSTRUCTIONS

1. Unpack unit. Save carton for off-season storage (if needed).

2. If hanging or mounting the trap place approximately 3–6 feet above the floor/ground level for optimal catch rate and easy

access for cleaning.

3. If mounting the trap to a wall, secure the mounting bracket to a wall, fence, or other stationary surface using the mounting

hardware (included). Then, mount the trap on the bracket by sliding the mounting channel on the side wall of the trap over the

mounting bracket peg.

4. Turn power switch to "ON" position (the power switch is located under the rain protector).

5. If using outdoors, plug cord into an outdoor extension cord as described in "IMPORTANT SAFETY INSTRUCTIONS".

6. For best catch results leave unit on at all times, except when cleaning or servicing.

7. If using outdoors, it is recommended to place the unit 20-40 feet away from where people will be sitting.

8. Catch rate activity will be higher at night. For best catch results it is recommended to keep the unit away from competing light

sources. For household and commercial, indoor and outdoor use.

9. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician to install the proper outlet. Do not change the plug in any way.

FCC COMPLIANCE

This device complies with part 18 of the FCC rules. This product may cause interference to radio equipment and should not be installed

near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30

MHz. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

USER MAINTENANCE INSTRUCTIONS - CLEANING

Clean the trap at least once a week to prolong life of the unit, insure fire prevention, and provide for more efficient operation.

1. Be sure to clean the unit once per week

2. Unplug before cleaning

3. For weekly cleaning, twist the cage clockwise, and remove the damper by grasping the crossbar near the edge of the damper

Pull up firmly. Remove any buildup from the inside of the retaining cage and fan with a brush. Replace damper, snap firmly into

place.

4. For major cleaning, remove the screws securing the fan housing to the light housing. After removing the screws, gently pull the

fan housing away from the light housing. Using a soft brush, remove dirt and debris from the light housing. Once the cleaning

process has been completed, align the screw holes in the fan housing with the screw holes in the lighting unit and tighten the

screws to the base of the lighting unit.

5. When replacing the retaining cage – DO NOT press / push against the screen windows.

REPLACING BULB Replace With DynaTrap Bulb #41050 (or equivalent G24 Type - 120V/7W UVA Bulb)

HANGER

ON/OFF SWITCH

The Light bulb life expectancy is approximately 3,000 hours (or about 4 months), and should be replaced regularly to ensure optimal

INTERRUPTEUR

UV effectiveness. Even though the bulb's light may be visible to you, its ability to attract insects diminishes over time.

DE MARCHE/

ARRÊT

1. UNPLUG UNIT, and allow bulb to cool before replacing.

2. Remove screw (A). Twist cover counter-clockwise (B). Tilt cover back to expose bulb (C). Note: Upper and lower sections will

remain connected by electrical wire - Do Not Pull or Attempt To Disconnect.

WALL MOUNT

UV BULB

AMPOULES

3. Untighten the screw securing the base of the light bulb to the light housing. Slide the metal clip to the side. Cover the bulb with a

cloth to protect your finger and hand. Grasp the bulb (with your hand and fingers protected by the cloth) and gently pull the bulb

from the socket.

4. Remove any debris from the lamp socket with a brush before inserting the new bulb. Replace the metal clip over the base of the

VENTILATEUR

FAN

bulb and tighten the retaining screw.

5. Replace cover onto grill and twist clockwise to lock, replace screw and tighten to secure.

CAGE DE

AUTOMATIC

RETAINING

RETENUE

CAGE

DAMPER

HOW THE DYNATRAP

MOSQUITO TRAP WORKS

Flying mosquitoes are attracted to the unit by the UV light. The

fan then pulls the mosquitoes into the screened base, trapping

them until they dehydrate and die. The base can be removed,

allowing the contents to be periodically emptied into the trash.

The see-through screen shows the mosquitoes trapped in the

compartment, alerting you when the cage needs to be emptied.

TROUBLESHOOTING

Problem:

Bulb does not

illuminate and fan does

not spin.

Bulb illuminates, but

fan does not spin.

Fan spins, but bulb does

not illuminate.

LIMITED WARRANTY

DYNAMIC warranties to the original purchaser that this product is free from defective materials and workmanship. This

warranty is limited to remedy any defective part for a period of one year from date of original date of purchase. Retain

DISPOSITIF

DE SUSPENSION

your original receipt as proof of purchase. This warranty does not apply to the light bulb, nor to, in our judgment, misuse or

abuse. If this unit has been altered, no warranty is in force. This warranty does not apply if this unit is purchased outside the

United States, excluding Canada and Mexico. In no case shall DYNAMIC be liable for any accidental, punitive, consequential,

SUPPORT MURAL

or any other damages of any kind for breach of this or any other warranty, expressed or implied, whatsoever. Some states

do not allow limitation on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

REPLACEMENT PARTS

REGISTRE

41050

AUTOMATIQUE

To see all replacement and accessory parts available for your DynaTrap, visit www.DynaTrap.ca.

SAVE THESE INSTRUCTIONS

Dynamic Solutions Worldwide, LLC

69 N. Locust St., Lititz, PA 17543

1-877-403-8727 (TRAP)

[email protected]

www.dynatrap.ca

Imported by/Importé par:

Woodstream Canada Corporation

25 Bramtree Court, Unit 1

Brampton, ON L6S 6G2

ON/OFF SWITCH

UV BULB

FAN

RETAINING

CAGE

Possible cause:

Correction:

1. No electrical power.

1. Check plug and receptacle and fuse or circuit breaker.

2. Check to make sure power is switched to the "ON" position.

1. Shorted fan.

1.UNPLUG UNIT: Examine fan to see that it is free from

foreign material, dirt or build-up of dead insects.

Clean unit as in "CLEANING" section.

1. Bulb not seated properly

1. Check all sockets for proper bulb seating and alignment.

2. Burnt out bulb.

2. Replace bulb if needed following instructions under

"Replacing Bulb"

7-Watt Replacement UV Fluorescent Bulb (1 piece)

FOR HOUSEHOLD AND COMMERCIAL,

INDOOR AND OUTDOOR USE

120 V~ 60 Hz 15 W

This device complies with Performance Standards

for Light-Emitting Products, 21 CFR, Part 1040,

Chapter 1, Subchapter J, Radiological health.

HANGER

INTE

DE M

ARR

WALL MOUNT

AMP

VEN

CAG

AUTOMATIC

RETE

DAMPER