GALLERY STRETCHER-240 Manuale di istruzioni - Pagina 12

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistemi di imballaggio estensibile GALLERY STRETCHER-240. GALLERY STRETCHER-240 17.

9. Once the canvas is clamped and you are satisfied with the alignment move the

entire assembly forward and off of the plates. This is referred to as the "un-loaded"

position. The stretcher frame should be in front of the plates and the canvas should be

held fast beneath the clamp. It is now ready to be stretched.

Note overhang

10. Depress the left foot pedal (stretching pedal). Be sure to maintain control of the

stretcher frame with your free hand. It should rest on the outside rail applying only

light pressure. The stretching pressure should be no more than 15-20 psi to start a

stretch. Increase the pressure slowly using the regulator on the right side of the

machine and let the frame rise no more than 3-4". Do not push the frame flat against

the deck. Pushing down on the frame during a stretch will promote slipping.

"Small art tends to flip off the stretcher plates. Always keep a free hand on the rail."