GALLERY STRETCHER-240 Manuale di istruzioni - Pagina 8

Sfoglia online o scarica il pdf Manuale di istruzioni per Sistemi di imballaggio estensibile GALLERY STRETCHER-240. GALLERY STRETCHER-240 17.

LOADED AND UN-LOADED POSITIONS

Once the stretcher bars are adjusted and you are ready to stretch you need to remember

that all stretches start in the "un-loaded_ position. When the operator is ready to stretch

the canvas they would "clamp" the canvas and then move the wood stretcher frame

forward and off of the stretcher plates, it should now be resting on the angle bar in front

of the plates. This position is referred to as the "un-loaded" position. In this position the

stretcher bar should extend approximately ½" over the front of the angle bar. In summary

the wood stretcher bar should be on top of the stretcher plates but the approximately ½"

behind the face of the front angle bar in the "loaded" position. In the "un-loaded"

position the wood stretcher bar should be approximately ½" in front of the angle bar.

This is referred to as the "Un-loaded Position"

Basic Operation

Video:

http://www.youtube.com/watch?v=w5000LVd9tc

1. Lay the artwork "facedown" on a clean work surface behind the machine just of

the deck. Fold the canvas along the image so that approximately 1/16" of the

image is extending over the radius.