Gallet BAC 103 Vertou Manuale di istruzioni - Pagina 16
Sfoglia online o scarica il pdf Manuale di istruzioni per Bilance Gallet BAC 103 Vertou. Gallet BAC 103 Vertou 20. Electronic nutritional kitchen scale
Stampa la pagina
TO WEIGH:
1)
Press the ON button to turn the scale on
2)
Wait until display shows 0.0
3)
Place item to be weighed on the platform
4)
Weight is displayed
TO ADD & WEIGHS
To weigh several different ingredients, press the TARE button to reset the display to zero.
NOTE: When weights have been tared out, the display will show a negative number when
the items are removed from the scale.To reset the scale back to zero for a new measurement,
press the TARE button.
TO DISPLAy NUTRITIONAL READINGS:
1)
Press the ON button to turn the scale on
2)
Place food item to be weighed on the platform.
3)
Clear the food code if necessary by pressing the CLR button- the food code 000
is displayed.
4)
Refer to the table in this manual and identify the 3 digit code for the food item being weighed
(e.g. 755 for honey).
5)
Using the numerical buttons (0 - 9) enter the 3 digit code
6)
When the 3rd digit is pressed, the values for calories (CAL), salt (SALT), protein (PROT), fat
(FAT), carbohydrates (CARB), cholesterol (CHOL) and fiber (FIBR) for the food item will all
appear on the screen.
TO SAVE NUTRITIONAL VALUES OF FOODS IN THE DATABASE
TO MEMORy:
1)
Follow steps I - 6 of the 'To Display Nutritional Readings' section.
2)
Press M+ key to add the food item being weighed to memory.
3)
M01 will be shown at the upper left of the display to indicate that one set of values has been
saved to memory.To add additional food items to memory, repeat the previous steps.
NOTE: The scale can only save foods in the existing database to memory.
New foods cannot be user-added.
NOTE: The memory is saved permanently, even if the scale is switched off except when
the batteries are removed.
NOTE: The maximum number of food items that can be added to the memory is 99.
the memory must be cleared by following the instructions in the 'To Clear Memory' section.
TO RECALL MEMORy:
1)
Press MR button to see the total ingredients of the food items stored to memory.
2)
∑ is displayed next to the memory indicator to indicate that the total memory is being
displayed.
3)
The total values for calories, salt, protein, fat, carbohydrates, cholesterol,
and fiber for the food items stored in memory will all appear on the screen.
NOTE: It is not possible to display the total weight of the food items stored to memory.
ENG - 16