Dynaudio Focus 30 XD Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Dynaudio Focus 30 XD. Dynaudio Focus 30 XD 15.
Anche per Dynaudio Focus 30 XD: Prima impostazione (2 pagine)
Stampa la pagina
Owner's Manual Focus XD
A
Distance to walls
Every loudspeaker not only disperses sound energy directly into the room, but also to
the side and even backwards. As a result, time-delayed reflections occur and add to the
original music signal. Thus, when loudspeakers are positioned too close to walls, the sound
quality can be restricted. Focus XD loudspeakers were developed to be placed free-
standing, and therefore they reach their optimum performance when positioned as clear of
any walls as possible.
►
To reduce possible influences from the back and sidewalls, the distance to these
boundaries should ideally not be less than 0.5 meter.
►
Adjust the sound of your loudspeakers (see page 18).
•
Distance to the listening
The distance between each loudspeaker and your listening position should be the same
position
(B). Try to achieve an isosceles triangle.
•
The distance between the loudspeakers should be the same or, preferably, slightly less
than the distance between each loudspeaker and your listening position (A, B).
•
The closer the listening position is in relation to the loudspeakers, the closer the
speakers can be positioned to each other.
•
As a starting point, it is recommended that the speakers be about 2 meters apart from
each other for the best results (A).
•
If the speakers are positioned too close to each other, the stereo image will not seem
realistic; if that distance is too wide, the image may leave an acoustic hole in the middle.
•
Paying attention to the image during listening tests will help dictate optimum placement
during experimentation and setup.
10
A
B
B
B
D ≥ 0.5 m
dynaudio.com/focusxd
A≤B
Loudspeaker toe-in
Depending on your personal listening environment and room dimensions, the loudspeakers
may be angled in towards the listening area to focus the sound radiation. This positioning
will typically improve imaging and is especially recommended by Dynaudio. However, you
are free to select the precise position based on your personal listening habits.
A cloth grille is included and can be affixed to the cabinet to help protect the drivers from
dust and any other influences. The grille is acoustically optimized, but the highest sound
quality levels will be attained without any grille covers in place during listening.
If a front grille is used, it is held on the front of the housing by means of magnets.
Grille
Removing and attaching the front grille:
►
To remove the grille, gently pull the grille at all corners straight away from the front.
►
To fit the grille, line it up exactly in front of the housing with the logo facing upwards and
carefully push the cover onto the loudspeaker.
Setup / Location
11