Dynaudio Xeo 10 Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Dynaudio Xeo 10. Dynaudio Xeo 10 18.
Stampa la pagina
Dynaudio Xeo 10/20/30
Scope of
1
2 Xeo 10/20/30 speakers
delivery
2
2 Xeo 10/20/30 speaker cloth covers
3
1 Xeo 10/20/30 remote control
4
2 power cables (country-specific version, length: 2.5 m)
5
1 stereo cable (RCA – RCA, length: 1.5 m) (Xeo 10 only)
6
1 optical cable (Toslink – Toslink, length: 1.5 m) (Xeo 10 only)
7
1 stereo cable mini jack (3.5 mm – 3.5 mm, length: 1.5 m) (Xeo 10 only)
1 Xeo first time setup manual (quick guide for installation, not shown)
1
2
12
MUTE
ON
OFF
1
Line
2
Opt
3
Coax
VOLUME
Line
4
USB
Opt
A
Aux
B
C
DIRECT
HUB
3
Connections
and control
elements
4
5
Neutral
Red
Left
Wall
Green
Right
Corner
Blue
I
6
1
2
3
4
R
L
7
Aux In
Line In
Optical In
Service
Mains socket
II (master unit only)
Scope of delivery / Connections and control elements
This section describes the connections and control elements. Please contact your
Dynaudio Xeo distributor if you have any problems with connection and start-up.
Distributor addresses can be found on the Internet at dynaudio.com.
Elements on the rear panel
The Xeo 10/20/30 set consists of a master and a slave unit. The master unit carries the
audio input interfaces.
A:
Sound adjustment (depending on the position of the speakers)
Speaker
• Neutral = with free-standing placement
position
• Wall = if placed near a wall
• Corner = if placed in a corner
Speaker placement
• Left = left speaker for stereo mode
• Right = right speaker for stereo mode
B:
Selection of audio zones: Speakers assigned to different zones can be
II
Speaker
controlled separately via the remote control. The zones are identified as Red,
I
ID/Zone
Green, and Blue.
C:
Aux In: To connect an analog audio source to the speaker via mini jack.
A
Line In
B
To connect an analog audio source to the speaker via RCA.
D:
Optical In (Toslink):To connect a digital audio source to the speaker.
C
D
E
E:
USB In
F
For firmware update only.
F:
Mains socket
To connect the speaker to the mains voltage.
13