Dynaudio Audience SUB-30A Manuale d'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale d'uso per Subwoofer Dynaudio Audience SUB-30A. Dynaudio Audience SUB-30A 19.
Input terminal Right and Left / Input terminal Mono
This subwoofer provides 3 low level inputs: Left, Right, and Mono. These inputs can be used
in any combination. Signals from all 3 inputs are summed and fed to the subwoofer.
Do not connect any of these inputs to high level signals such as power amplifier speaker
outputs!
If a SUB OUT terminal (or equivalent) is not present on the pre-amp/processor, then connect
the subwoofer via PRE OUT to <IN R> and <IN L>.
Output switch / Output terminal Right and Left
The output terminals are intended for use when a separate power amplifier or integrated
amplifier with separate inputs is available.
Using this output enables the removal of frequencies below 80 Hz from the main speakers by
setting the switch to < Lowcut 80 Hz>.
With the output switch in the <Flat> position, the input terminals are connected directly to
the output terminals. With the output switch in the <Lowcut 80 Hz> position, the signal
passes through an active second order (12 dB/octave, f
selection cuts frequencies below 80 Hz to the main speakers, thereby reducing potential
distortion.
= 80 Hz) high-pass filter. This
-3dB