AgroSci GardenWall Istruzioni - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per Attrezzature per prato e giardino AgroSci GardenWall. AgroSci GardenWall 4.

STEP 1: Insert funnel stems into filter cuts. Locate

opening in poly grid, and insert funnel/filter through

grid. Locate raised fitting in pot bottom on left of pot

bottom. Insert funnel stem into fitting and push until

you hear a click. Repeat for remaining pots.

STEP 2: Insert plants into the pots, adding soil mix to

fill gaps.

STEP 3: Identify vertical surface. Place mounting rack

against surface and use level to check rack is straight

and level. Mark guide holes with drill bit. Remove rack

and drill guide holes.

When mounting on stucco, siding, shingles or masonry

use small hammer to tap anchors into the guide holes.

When mounting on post,

fence or railing, anchors

unnecessary.

Return rack to surface

and drive in the mounting

screws. Repeat for

remaining racks. Zip ties

(not included) are an

alternative fastener for

fences, posts and railings.

STEP 4:

Your rack is now installed. Line up top of pot rear tabs

lift up the pot to put tabs behind upper bar of frame

area for pot and the hook base on bottom bar. To

remove pots, raise pot up, tilt bottom out lower pot

and remove.

WATERING:

Ideally, nature will provide enough rain to water your

AgroSci™ GardenWall.™ If not, the unit features a

failsafe, easy-to-use watering system:

Pour water into top row

of funnels. Water will

flow through soil and

out the pot bottom into

the next row of funnels.

Keep watering until water

comes from pot bottoms

in lowest row.