HighPoint SSD7103 Manuale di installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di installazione per Hardware del computer HighPoint SSD7103. HighPoint SSD7103 11. Linux ubuntu desktop 19.10
Anche per HighPoint SSD7103: Manuale di installazione (11 pagine), Manuale di installazione (15 pagine), Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (12 pagine), Manuale di installazione (13 pagine), Manuale di installazione (11 pagine), Manuale di installazione (11 pagine), Manuale di installazione rapida (9 pagine), Manuale di installazione (12 pagine)

HighPoint SSD7103 Manuale di installazione
SSD7103 Linux CentOS7.6 Installation Guide
1 Overview
The purpose of this document is to provide clear instructions on how to install and use
HighPoint NVMe RAID Controller on Linux system.
2 Installing Linux on SSD7103 RAID Controller
If you would like to install Linux onto drives attached to HighPoint NVMe RAID controller,
please perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7103 RAID Controller, you can use HighPoint NVMe
UEFI Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.
Before installation, you must remove all the disk drives, which are not physically attached to
HighPoint NVMe RAID controller, from your system.
Note
SSD7103 only support UEFI boot .
the SSD7103 UEFI will be loaded firstly. If not, try to move it to another PCI slot. Otherwise you
may be unable to boot up your system.
Step 2 Check System UEFI Settings
1.
Set UEFI setting with SuperMicro X11DAi-N motherboard as an example.
a.
Set "Boot Mode Select" to "UEFI";
If you have other SCSI adapters installed, you must make sure
2/11