HighPoint HPT370 Manuale di installazione - Pagina 15

Sfoglia online o scarica il pdf Manuale di installazione per Controllore HighPoint HPT370. HighPoint HPT370 16. Ata raid controller for red hat linux

HPT370/372/372A Red Hat Linux Installation Guide

Red Hat Linux 7.0:

# cp /tmp/hpt37x2.o /lib/modules/2.2.16-22/scsi/hpt37x2.o

Red Hat Linux 7.1:

# cp /tmp/hpt37x2.o /lib/modules/2.4.2-2/kernel/drivers/scsi/hpt37x2.o

Red Hat Linux 7.2:

# cp /tmp/hpt37x2.o /lib/modules/2.4.7-10/kernel/drivers/scsi/hpt37x2.o

5) Reboot your system to make the new driver take effect.

6 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to HPT37x controller. Installation of the management

software is optional but recommended.

To run the RAID Management GUI, you must have the following software packages

installed on your system:

If you are using KDE or GNOME workstation, they are already installed. Otherwise you

may check your system and refer to your Linux system manual for how to install these

packages.

You should have two files to finish the installation.

hptinstall.sh

hptraid.tar.gz

Before installation, you must log on as root and change the directory to the location

where your installation files are. Then you can use the command " sh hptinstall.sh – i" to

install the software.

The following is an example.

[root@tmp]# ls

hptinstall.sh hptraid.tar.gz

[root@tmp]# sh hptinstall.sh –i

Starting hptsvr daemon:

HighPoint ATA RAID Management Software has been installed successfully!

X-Window system

gtk library v1.2 or later.

Installation script file

Package of software components

[ OK ]

- 13 -