Emerson Bettis RTS Manuale di servizio - Pagina 12
Sfoglia online o scarica il pdf Manuale di servizio per Apparecchiature industriali Emerson Bettis RTS. Emerson Bettis RTS 18. Extension board for modbus rtu
Anche per Emerson Bettis RTS: Manuale di installazione, funzionamento e manutenzione (16 pagine), Manuale di installazione, funzionamento e manutenzione (18 pagine), Manuale di installazione, funzionamento e manutenzione (18 pagine), Manuale di installazione, funzionamento e manutenzione (16 pagine)
Stampa la pagina
Section 3: Lubricant Recommendation and Requirements
October 2021
3.4
Lubricant Points FQ
The table values given apply to re-lubrication in accordance with the re-lubrication intervals in the
operating instructions. After re-lubrication has been carried out, 2-3 full strokes must be performed.
If torque switch-off occur, the grease nipples must be removed, and the strokes repeated.
NOTE:
Lubricant can leak out of the lubrication points.
After that, the grease fittings should be installed.
At initial assembly or upon complete disassembly of the spindle nut is filled, all gears and bearings
pocketed filling. All moving parts as well as internal surfaces are coated to cover them.
•
•
Table 2.
Figure 2
9
Lubricant quantity according to expenditure.
Lubricant specification according to the operating instructions depending on the
temperature range.
Fuses on the Logic Board
Type
Main Gear
(cm
FQ03
FQ06
FQ10
FQ20
FQ30
FQ50
Lubrication points
Lubrication Point (Quantity)
1
2
Bearing Spindle Drive
)
(cm
3
8
-
18
-
20
42
20
68
20
90
20
80
Lubricant Recommendation and Requirements
Service Manual
VCIOM-16909-EN Rev. 0
3
Intermediate Gear
)
(cm
)
3
3
-
-
-
29
59
90