Gallien-Krueger 1001RB-II Manuale d'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Gallien-Krueger 1001RB-II. Gallien-Krueger 1001RB-II 8. Artist series
Anche per Gallien-Krueger 1001RB-II: Manuale d'uso (16 pagine)
Stampa la pagina
Safety Information
Please read all enclosed safety precautions before
connecting or operating this product.
Your amplifier has been factory configured for use
with the specific line voltage for your location only.
For example, units set to operate within countries
that supply 100-120 volt electrical service are not
compatible with 230-240 volt systems used in other
countries.
120 Volt/60Hz 15 amp circuit for the USA and
Canada.
230 Volt/(50/60Hz) 10 amp circuit for the UK and
Australia.
230 Volt/(50/60Hz) 10 amp circuit for Europe.
100 Volt/50Hz 15 amp circuit for Japan.
220 Volt/50Hz 10 amp circuit for Korea.
Proper AC circuit for all other countries.
Verify AC Circuit Capacity Before Use: The high
power output of your amplifier may require heavy
current draw under full load conditions. Connecting the
amplifier to a line with specifications other than
indicated above can create a safety or fire hazard and
may damage the amplifier. Connecting to the same
circuit used by other heavy-power devices, such as
high wattage lights, may cause circuit breakers to trip. It
is always a good idea to avoid using any audio equipment
on the same AC circuit as equipment with motors, such
as air conditioners or refrigerators. This will lessen the
possibility of power variation and electrical start-up noise
affecting your sound.
AC Power Cord: To avoid safety hazards, use only the
power cord supplied with your unit. If a replacement cord
is needed, make certain to use a standard IEC
compliant cord. Damaged power cords should be
replaced immediately. When setting up, make that the AC
plug is easily accessible. If you do not intend to use the
amplifier for a considerable length of time, disconnect
the plug from the AC Mains Socket.
700RB-II & 1001RB-II
Earth Grounding Connection: To prevent electric
shock, do not remove the grounding plug on the power
cord, or use any plug or extension cord that does not
have a grounding plug provided. Make certain that the
AC outlet is properly grounded as well. Do not use an
adapter plug with this product.
Do Not Open the Amplifier Enclosure: There are
no user serviceable parts inside this product. Opening the
amplifier enclosure may present a shock hazard.
Modification to the product will void your warranty. If
liquid enters the unit, or any metal object such as a
paper clip accidentally falls inside the enclosure,
disconnect the unit from the AC power source
immediately and consult an authorized service station.
Setup: To insure proper operation and to avoid
potential safety hazards, place the unit on a firm, level
surface. Do not plug or unplug the instrument or
speaker cable while the amplifier power is on.
Heat & Ventilation: For proper ventilation, maintain a
clearance of at least 8" above, sides, front and rear of the
unit for combos and 1.75" (one rack space) of
clearance above the unit for heads. Avoid using in
extremely hot or cold locations and areas that are
exposed to direct sunlight or near heating equipment.
Avoid using in moist or high humidity areas.
Cleaning & Maintenance: Clean only with a dry cloth.
Never use benzene, thinner, alcohol, or other volatile
cleaning agents. Do not use abrasive cleaners, as they
may damage the finish of metal parts. Avoid spraying
insecticides near the unit. No other maintenance
should be necessary.
Traveling: If traveling with the unit frequently, we
recommend a road case or cover to protect it from
scratches and road wear.
Packaging: The carton and packing materials used in
shipping your new amplifier were specifically designed to
cushion it from the shocks and vibration that occur
during transport. We suggest that you save the carton and
packing materials for use in shipping, in the event you
move, or the amplifier needs repair.
4