Gallien-Krueger Backline 100 Manuale di istruzioni per l'uso - Pagina 4
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Amplificatore per strumenti musicali Gallien-Krueger Backline 100. Gallien-Krueger Backline 100 6.
Stampa la pagina
Getting Started
1. Plug your guitar into the input jack and make
sure all of its volumes and tone controls are set
to "10". You can fine tune them later.
2. On the BackLine 100 - Start with the tone
controls and Presence control in the center
position (12 o'clock), all other controls on "0",
and all switches out.
3. Gradually turn up the "Clean Volume" control,
while playing, and set to desired level.
4. Experiment with the EQ Shift and tone controls
for your desired clean sound. Then add
Presence, Reverb, or the VCV
your tastes.
5. Switch to the Lead Channel by engaging the
Lead Select switch.
6. This time, turn up the "Lead Volume" slightly
and then increase the Gain until you have found
a suitable gain level (you may want to experi-
ment with the Lead 1/Lead 2 switch and the
Input Shape at this time, as well). Then continue
to set the Volume for a proper output level.
7. Again, follow the steps from 4 to fine-tune your
sound. There are many settings to experiment
with here, and you should try as many possibilities
as you can because you will probably find a
number of them that are very pleasing.
8. To help familiarized yourself with the
BackLine100's controls, you may want to use
the selected settings (shown on the right) as a
starting point. Please take note that these
settings are designed for specific guitar body
types as well as pickup configurations. Enjoy.
Selected Settings
(On Right)
• Controls shown in black are active or in the "in"
position.
• Volume settings will be somewhat dependant on
speaker configurations, desired volume level, and
outboard effects.
• Settings are intended for the BackLine 100
Combo as well as the BackLine 100 Head.
Start is a registered trademark of Fender, Les Paul is a registered
trademark of Gibson.
filter to suit