HighSecLabs FV11D-M Manuale di configurazione rapida - Pagina 6

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Hardware di rete HighSecLabs FV11D-M. HighSecLabs FV11D-M 8. Secure kvm isolators

Stampa la pagina

SECTIONS

Table of Contents

OPERATIOn

Running an EDID Capture

before using the Isolator, run a one-time EDID capture. This prevents the

continuous transfer of potentially malicious data - from the display to

the PC – that could infect the PC, cause data leakage, and so on.

Preparation:

• Connect the PC and all peripherals to the unit, according to the

diagram.

• Make sure the PC, display, and unit are On.

EDID Lock

HSL Secure KVM Isolators Quick Setup Guide

To run an EDID capture:

1. On the PC SIDE, short-click the EDID LOCK button – for less than

one second. Warning: Long-clicking the EDID LOCK button sends

the unit into an undesired loop. If this happens, restart the unit and

repeat the procedure.At first, the EDID LED flickers for a few seconds

and then lights continuously.

Note: If the EDID LED is Off, check the connections and that the

display is powered On. Then, repeat the procedure.

2. Restart the unit.

Note: An EDID capture needs to be performed for new installations

and when changing a display.