Highway The Wizard Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Sistema di sicurezza Highway The Wizard. Highway The Wizard 6. Work zone alert and information radio

Stampa la pagina

CB Channel Selection

While the dominant "trucker" channel nationally is 19, certain regional pref -

erences may influence your Channel A selection. Channel B may be set to

the primary emergency channel (9) or another secondary channel of your

choice

Place "MODE" switch in "SETUP" position.

Push "Display

A" switch to

display the

channel number

currently designated as the primary broadcast

channel

Push "Display B" to display the channel number

currently designated as the secondary channel.

If the selections are satisfactory, there is no need

to change the designated working channels.

Note: Channel B should be different from channel A

to avoid back-to-back messages on channel A. If

you wish to use only one channel, slide the channel

B on-off switch to "off."

To Designate Working Channels

To change the designated working channels...

1. Turn the "Channel Selector" until the desired channel on which you wish to

transmit a message appears in the "Channel Displayed" window.

2. Push the "Assign A" button to designate to the system that the channel dis -

played will be designated "Channel A".

Note: Although the Wizard is technically capable of being set to any of the 40

CB channels, for simplicity the factory pre-selects 6 channels starting with 19

and 9 - the channels that are normally used.

Page 8

Easy to Operate

Bring Wizard to desired location

If not already attached to a

power source plug into a cig -

arette lighter or other 12V DC

source

Select prerecorded message

or record on the spot

Select CB channels on which to

transmit and amount of delay

between messages

Turn mode control to

"Transmit" and the rest is

automatic.

The broadcast should be

under the direct control of a

nearby operator at all times

Page 5